NSK-RHP Bearing Insert 30 mm ID 40.3 mm OD 1130-30
- RS庫存編號:
- 785-4974
- 製造零件編號:
- 1130-30
- 製造商:
- NSK-RHP
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 件）*
TWD1,035.00
(不含稅)
TWD1,086.75
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 1 件從 2026年4月27日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 4 | TWD1,035.00 |
| 5 - 9 | TWD989.00 |
| 10 + | TWD960.00 |
* 參考價格
- RS庫存編號:
- 785-4974
- 製造零件編號:
- 1130-30
- 製造商:
- NSK-RHP
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | NSK-RHP | |
| Product Type | Bearing Insert | |
| Inside Diameter | 30mm | |
| Outside Diameter | 40.3mm | |
| Material | Cast Iron | |
| Static Load Rating | 11.3kN | |
| Locking Type | Set Screw | |
| Dynamic Load Rating | 19.5kN | |
| Series | 1100 | |
| Standards/Approvals | No | |
| Overall Width | 38.1mm | |
| Bore Type | Cylindrical | |
| Limiting Speed | 5300rpm | |
| 選取全部 | ||
|---|---|---|
品牌 NSK-RHP | ||
Product Type Bearing Insert | ||
Inside Diameter 30mm | ||
Outside Diameter 40.3mm | ||
Material Cast Iron | ||
Static Load Rating 11.3kN | ||
Locking Type Set Screw | ||
Dynamic Load Rating 19.5kN | ||
Series 1100 | ||
Standards/Approvals No | ||
Overall Width 38.1mm | ||
Bore Type Cylindrical | ||
Limiting Speed 5300rpm | ||
豁免
- COO (Country of Origin):
- GB
Self-Lube Bearing Inserts
For use with self-lube sealed bearing units or with user's own housings. Bearings are secured onto the shaft with a set-screw lock. When the axial load exceeds the limiting value, a shoulder should be provided on the shaft for the bearing inner ring to abut against so that the axial load is not transmitted through the set screws
相關連結
- NSK-RHP Bearing Insert 30 mm ID 40.3 mm OD 1130-30CG
- NSK-RHP Bearing Insert 25.4 mm ID 40.3 mm OD 1130-1
- NSK-RHP Bearing Insert 31.75 mm ID 40.3 mm OD 1130-1.1/4
- NSK-RHP Bearing Insert 30 mm ID 40.3 mm OD T1030-30G
- NSK-RHP Bearing Insert 31.75 mm ID 40.3 mm OD 1030-1.1/4G
- NSK-RHP Bearing Insert 25 mm ID 40.3 mm OD 1030-25G R
- NSK-RHP Bearing Insert 30 mm ID 72 mm OD 1135-30
- NSK-RHP Bearing Unit Insert Cap 30 mm ID 67.5 mm OD 40P-2 Pack