NSK-RHP Bearing Insert 30 mm ID 62 mm OD 1030-30G
- RS庫存編號:
- 749-014
- 製造零件編號:
- 1030-30G
- 製造商:
- NSK-RHP
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 件）*
TWD1,134.00
(不含稅)
TWD1,190.70
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 10 件準備從其他地點送貨
- 加上 14 件從 2026年4月20日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 4 | TWD1,134.00 |
| 5 - 9 | TWD1,090.00 |
| 10 + | TWD1,069.00 |
* 參考價格
- RS庫存編號:
- 749-014
- 製造零件編號:
- 1030-30G
- 製造商:
- NSK-RHP
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | NSK-RHP | |
| Inside Diameter | 30 mm | |
| Product Type | Bearing Insert | |
| Outside Diameter | 62 mm | |
| Material | Steel | |
| Static Load Rating | 11.3kN | |
| Locking Type | Screw | |
| Dynamic Load Rating | 19.5kN | |
| Series | NSK | |
| Bore Type | Round | |
| Overall Width | 16mm | |
| Standards/Approvals | No | |
| Limiting Speed | 5300rpm | |
| 選取全部 | ||
|---|---|---|
品牌 NSK-RHP | ||
Inside Diameter 30 mm | ||
Product Type Bearing Insert | ||
Outside Diameter 62 mm | ||
Material Steel | ||
Static Load Rating 11.3kN | ||
Locking Type Screw | ||
Dynamic Load Rating 19.5kN | ||
Series NSK | ||
Bore Type Round | ||
Overall Width 16mm | ||
Standards/Approvals No | ||
Limiting Speed 5300rpm | ||
不適用
Self-Lube Bearing Inserts
For use with self-lube sealed bearing units or with user's own housings. Bearings are secured onto the shaft with a set-screw lock. When the axial load exceeds the limiting value, a shoulder should be provided on the shaft for the bearing inner ring to abut against so that the axial load is not transmitted through the set screws
相關連結
- NSK-RHP Bearing Insert 30 mm ID 62 mm OD 1230-30G
- NSK Insert Bearing 30 mm ID 30 mm OD 1030-30G
- NSK-RHP Bearing Insert 30 mm ID 40.3 mm OD T1030-30G
- NSK-RHP Bearing Insert 30 mm ID 46.9 mm OD 1035-30G
- NSK-RHP Bearing Insert 30 mm ID 44.5 mm OD 1030-30DECG
- NSK Insert Bearing 30 mm ID 62 mm OD T1030-30G
- NSK-RHP Bearing Insert 25 mm ID 40.3 mm OD 1030-25G R
- NSK-RHP Bearing Insert 30 mm ID 62 mm OD J1030-30GCR