INA Bearing Insert 40 mm ID 80 mm OD GSH40-XL-2RSR-B
- RS庫存編號:
- 194-6929
- 製造零件編號:
- GSH40-XL-2RSR-B
- 製造商:
- INA
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 件）*
TWD3,475.00
(不含稅)
TWD3,648.75
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年4月20日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 12 | TWD3,475.00 |
| 13 - 24 | TWD3,336.00 |
| 25 + | TWD3,267.00 |
* 參考價格
- RS庫存編號:
- 194-6929
- 製造零件編號:
- GSH40-XL-2RSR-B
- 製造商:
- INA
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | INA | |
| Inside Diameter | 40 mm | |
| Product Type | Bearing Insert | |
| Outside Diameter | 80 mm | |
| Static Load Rating | 31kN | |
| Dynamic Load Rating | 19.7kN | |
| Overall Width | 38mm | |
| Bore Type | Round | |
| Series | GSH | |
| Standards/Approvals | No | |
| 選取全部 | ||
|---|---|---|
品牌 INA | ||
Inside Diameter 40 mm | ||
Product Type Bearing Insert | ||
Outside Diameter 80 mm | ||
Static Load Rating 31kN | ||
Dynamic Load Rating 19.7kN | ||
Overall Width 38mm | ||
Bore Type Round | ||
Series GSH | ||
Standards/Approvals No | ||
Radial insert ball bearings are ready-to-fit machine elements. In combination with drawn shafts, they are particularly easy to fit and suitable for the design of economical bearing arrangements. They are highly suitable where predominantly radial loads must be supported
Radial insert ball bearings with an extended inner ring undergo less tilting and therefore run more smoothly
Radial insert ball bearings with a spherical outer ring are highly suitable where: Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where: A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where: shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where: Vibrations and shocks must be supported
Damping of running noise is required
相關連結
- INA Bearing Insert 50 mm ID 90 mm OD GSH50-XL-2RSR-B
- INA Bearing Insert 30 mm ID 62 mm OD GSH30-XL-2RSR-B
- INA Bearing Insert 35 mm ID 72 mm OD GSH35-XL-2RSR-B
- INA Bearing Insert 25 mm ID 52 mm OD GSH25-XL-2RSR-B
- INA Bearing Insert 20 mm ID 47 mm OD GSH20-XL-2RSR-B
- INA Bearing Insert 40 mm ID 80 mm OD 208-XL-NPP-B
- INA Bearing Insert 80 mm ID 140 mm OD GE80-XL-KRR-B
- INA Bearing Insert 40 mm ID 80 mm OD GYE40-XL-KRR-B