RS Better World
INA Bearing Insert 40 mm ID 80 mm OD GLE40-XL-KRR-B
- RS庫存編號:
- 194-6884
- 製造零件編號:
- GLE40-XL-KRR-B
- 製造商:
- INA
可享批量折扣
查看批量定價選項小計（1 件）*
TWD3,058.00
(不含稅)
TWD3,210.90
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年7月21日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 12 | TWD3,058.00 |
| 13 - 24 | TWD2,937.00 |
| 25 + | TWD2,876.00 |
* 參考價格
- RS庫存編號:
- 194-6884
- 製造零件編號:
- GLE40-XL-KRR-B
- 製造商:
- INA
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | INA | |
| Product Type | Bearing Insert | |
| Inside Diameter | 40mm | |
| Outside Diameter | 80mm | |
| Static Load Rating | 34.5kN | |
| Dynamic Load Rating | 19.8kN | |
| Bore Type | Round | |
| Overall Width | 42.9mm | |
| Standards/Approvals | No | |
| Series | GE | |
| Better World Product | Yes | |
| Better World Claim | Extended Product Life, Saves Energy | |
| 選取全部 | ||
|---|---|---|
品牌 INA | ||
Product Type Bearing Insert | ||
Inside Diameter 40mm | ||
Outside Diameter 80mm | ||
Static Load Rating 34.5kN | ||
Dynamic Load Rating 19.8kN | ||
Bore Type Round | ||
Overall Width 42.9mm | ||
Standards/Approvals No | ||
Series GE | ||
Better World Product Yes | ||
Better World Claim Extended Product Life, Saves Energy | ||
Radial insert ball bearings are ready-to-fit machine elements. In combination with drawn shafts, they are particularly easy to fit and suitable for the design of economical bearing arrangements. They are highly suitable where predominantly radial loads must be supported
Radial insert ball bearings with an extended inner ring undergo less tilting and therefore run more smoothly
Radial insert ball bearings with a spherical outer ring are highly suitable where: Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where: A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where: shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where: Vibrations and shocks must be supported
Damping of running noise is required
相關連結
- INA Bearing Insert 40 mm ID 80 mm OD GE40-XL-KRR-B
- INA Bearing Insert 80 mm ID 140 mm OD GE80-XL-KRR-B
- INA Bearing Insert 40 mm ID 80 mm OD GYE40-XL-KRR-B
- INA Bearing Insert 25 mm ID 52 mm OD GYE25-XL-KRR-B
- INA Bearing Insert 25 mm ID 52 mm OD GE25-XL-KRR-B
- INA Bearing Insert 60 mm ID 130 mm OD GNE60-XL-KRR-B
- INA Bearing Insert 30 mm ID 62 mm OD GYE30-XL-KRR-B
- INA Bearing Insert 40 mm ID 90 mm OD GNE40-XL-KRR-B