INA Bearing Insert 25 mm ID 52 mm OD RAE25-XL-NPP-B

This bearing insert is a high-performance solution designed for various industrial applications. Made of steel, it features an inside diameter of 25mm and an outside diameter of 52mm, providing robust support for rotational and linear motion. With impressive load ratings, this product is engineered to efficiently manage significant operational demands.

• High static load rating of 7800N ensures reliability under pressure

• Utilised in automation machinery for smooth operation

The insert boasts a static load rating of 7800N and a dynamic load rating of 14000N, handling significant forces efficiently.

The steel construction offers high tensile strength and durability, suitable for high-load situations, ensuring minimal wear and maintenance over time.

With a 25mm inside diameter, this insert is designed to fit standard housing sizes, ensuring compatibility with various applications in different industries.

Installation typically involves placing the bearing insert into the housing and securing it properly, allowing for efficient operation with minimal adjustments needed thereafter.

INA from Schaeffler classic radial insert ball bearings are located on the shaft with a locking collar. They are suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of rotation.;The locking collar is preferably tightened in the direction of rotation and secured with a grub screw. This location method prevents damage to the shaft and can be easily loosened again.;The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded.;The R seal is two zinc-coated sheet steel washers extended outwards and angled downwards with intermediate NBR part and radially preloaded seal lip. Better protection against mechanical damage.

• Lower operating costs;• Reduced maintenance due to improved lubrication;• Lower heat generation;• Less noise;• Protected against fretting corrosion;• Shaft diameters from 12 mm to 60 mm (RAE..NPP) and (GRAE..-NPP-B);• Shaft diameters from 20 mm to 30 mm (RALE..NPP);• Shaft diameters from 17 mm to 120 mm (GE..-KRR-B)

FA106 - Bearing subjected to special noise testing;B - Bearing with special outer ring;NPP - Lip seals on both sides (P type seal);KRR - Lip seals on both sides (R type seal)