SOMO-II 4D Systems Audio Processor 16-Pin

小計(1 件)*

TWD1,050.00

(不含稅)

TWD1,102.50

(含稅)

Add to Basket
選擇或輸入數量
暫時缺貨
  • 25 件從 2026年5月01日 起裝運發貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 +TWD1,050.00

* 參考價格

RS庫存編號:
841-7869
製造零件編號:
SOMO-II
製造商:
4D Systems
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

4D Systems

Product Type

Audio Processor

Processor Type

Audio Module

Interface Type

2 Wire

Clock Frequency

48kHz

Mount Type

Through Hole

Minimum Supply Voltage

3.3V

Maximum Supply Voltage

5V

Pin Count

16

Minimum Operating Temperature

0°C

Maximum Operating Temperature

70°C

Standards/Approvals

No

Length

21mm

Height

11.3mm

Series

SOMO-II

Automotive Standard

No

Supply Current

300mA

SOMO-II Audio-Sound Module


The SOund MOdule 2 (SOMO-II), from 4D Systems, is a compact audio-sound module designed for all embedded audio-sound applications. The SOMO-II is designed to play MP3 audio files from a micro-SD card or USB 2.0 flash drive with extra components. An on-board 16-bit MCU is specifically designed for hardware audio decoding.

The files can be stored in the root folder of the micro-SD or USB flash drive. It can take up to 99 folders with 255 songs in each. The audio files can be loaded onto the micro-SD card or USB flash drive using a PC or laptop without additional software.

The SOMO-II offers two modes, SERIAL-MODE and KEY-MODE:

SERIAL-MODE has a 2-wire serial UART interface to a microcontroller via the TX and RX pins. A range of audio operations such as play, pause, stop, next, previous and volume control are available to the host micro through serial commands.

KEY-MODE is a stand-alone operation where the host micro is not needed. It is then possible to control the module with just a few push buttons.

Features of the SOMO-II audio-sound module:

Compact 16-pin package

Dimensions: 21 x 20.5 x 11.3 mm

24-bit DAC output

SERIAL-MODE or KEY-MODE

Mono amplified speaker output

Stereo DAC audio output for external amp/headphones

On-board micro-SD adaptor

Supports up to 32GB micro-SD or USB 2.0 flash drive

3.3V to 5V DC voltage range (single supply)

4D Systems Display Accessories


相關連結