Ultimaker Nozzle for use with Ultimaker 2, Olsson Block 0.4 mm
- RS庫存編號:
- 110-1983
- 製造零件編號:
- OBN002
- 製造商:
- Ultimaker
暫時無法供應
我們無法確定此產品何時有貨，RS 預計將其從我們的產品目錄中移除。
替代產品
該產品我們目前不提供。 這是我們推薦的替代產品。
個
TWD193.00
(不含稅)
TWD202.65
(含稅)
- RS庫存編號:
- 110-1983
- 製造零件編號:
- OBN002
- 製造商:
- Ultimaker
規格
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Ultimaker | |
| Product Type | Nozzle | |
| Nozzle Material | Brass | |
| For Use With | Ultimaker 2, Olsson Block | |
| Nozzle Size | 0.4 mm | |
| Standards/Approvals | No | |
| 選取全部 | ||
|---|---|---|
品牌 Ultimaker | ||
Product Type Nozzle | ||
Nozzle Material Brass | ||
For Use With Ultimaker 2, Olsson Block | ||
Nozzle Size 0.4 mm | ||
Standards/Approvals No | ||
豁免
- COO (Country of Origin):
- NL
Ultimaker 3D Olsson Block Brass Jet Nozzle Printing Parts & Accessoriess
The Ultimaker allows for quick and easy nozzle changes, so different nozzle sizes can be selected to suit each project. Use a smaller nozzle to print fine lines for more detail, or use a larger nozzle to print thicker lines to decrease print duration. The Olsson block brass Jet nozzles have a special tip angle and shoulder width, they also have a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them slip more.
Note:
This nozzle is compatible with M6 Threads, you can put it on the Ultimaker Original (the fan shroud must be modified) or any of the Ultimaker family that has the Olsson Block mounted.
Features and Benefits
Clean them efficiently with cold pulls
Print faster, the plastic flows much easier than in classic nozzles
The 0.4mm is the standard size for a lot of 3D printers
The geometry of the inside makes it easier to get rid of plastic so changing colours or filament type is done faster and safer
Use the 0.25mm brass nozzle to print small detailed prints
相關連結
- Ultimaker Nozzle Nozzle for use with Ultimaker 2, Olsson Block 0.5 mm
- Ultimaker Nozzle Nozzle for use with Olsson Block, Ultimaker 2 0.25 mm
- Ultimaker Nozzle Olsson Block Kit for use with Ultimaker 2
- Ultimaker Print Head for use with Ultimaker 2+ / Olsson Block 0.25 mm 0.6 mm, 0.8 mm
- Ultimaker Nozzle for use with Ultimaker S3, Ultimaker S5 0.4 mm
- Ultimaker Print Head for use with Ultimaker 2+ / Olsson Block 0.6 mm
- Ultimaker Nozzle for use with Ultimaker S5, Ultimaker S3 0.6 mm
- Ultimaker 3D Printing Kit for use with Ultimaker 3 Extended Ultimaker S3, Ultimaker S5 0.4 mm