Ultimaker Nozzle Olsson Block Kit for use with Ultimaker 2
- RS庫存編號:
- 110-1981
- 製造零件編號:
- OBK001
- 製造商:
- Ultimaker
暫時無法供應
我們無法確定此產品何時有貨,RS 預計將其從我們的產品目錄中移除。
- RS庫存編號:
- 110-1981
- 製造零件編號:
- OBK001
- 製造商:
- Ultimaker
規格
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Ultimaker | |
| Product Type | Nozzle | |
| Sub Type | Olsson Block Kit | |
| For Use With | Ultimaker 2 | |
| Nozzle Material | Brass | |
| Standards/Approvals | No | |
| 選取全部 | ||
|---|---|---|
品牌 Ultimaker | ||
Product Type Nozzle | ||
Sub Type Olsson Block Kit | ||
For Use With Ultimaker 2 | ||
Nozzle Material Brass | ||
Standards/Approvals No | ||
豁免
- COO (Country of Origin):
- NL
Ultimaker 3D Olsson Block Printing Parts & Accessoriess
The Ultimaker allows for quick and easy nozzle changes, so different nozzle sizes can be selected to suit each project. A larger nozzle is suitable for faster printing, while a smaller nozzle can be used to create more detailed prints.
Note:
Use of a torque wrench with the socket is not required but highly recommended to install nozzles without over-tightening. If a torque wrench is available for use with the socket during installation, please set it to a force between 1 and 1.5Nm. Take care not to set the force higher than 2Nm, as the nozzle could break off inside the block.
Supplied with:
Olsson block comes with 4 nozzles in various sizes (0.25mm, 0.40mm, 0.60mm and 0.80mm), a screwdriver and a socket.
Features and Benefits
Filaments are available in different sizes and diameters and nozzles always need to be carefully selected
Nozzles or dual nozzles are in constant operation and its wearing risk is increased
Applications
Heated beds
Motor extruders
相關連結
- Ultimaker Nozzle Nozzle for use with Olsson Block, Ultimaker 2 0.25 mm
- Ultimaker Nozzle Nozzle for use with Ultimaker 2, Olsson Block 0.5 mm
- Ultimaker Nozzle for use with Ultimaker 2, Olsson Block 0.4 mm
- Ultimaker Print Head for use with Ultimaker 2+ / Olsson Block 0.6 mm
- Ultimaker Print Head for use with Ultimaker 2+ / Olsson Block 0.25 mm 0.6 mm, 0.8 mm
- Ultimaker Nozzle for use with Ultimaker S5, Ultimaker S3 0.6 mm
- Ultimaker Nozzle for use with Ultimaker S3, Ultimaker S5 0.4 mm
- Ultimaker 3D Printing Kit for use with Ultimaker S5 Ultimaker S3, Ultimaker 3 Extended 0.4 mm
