Beha-Amprobe 2100-alpha, LED Voltage Tester, 690V ac/dc Continuity Check, Battery Powered CAT III, CAT IV, 2100-alpha

RS庫存編號:: 836-2700
Distrelec 貨號:: 300-28-571
製造零件編號:: 2100-alpha
製造商:: Beha-Amprobe

Beha-Amprobe 2100-alpha, LED Voltage Tester, 690V ac/dc Continuity Check, Battery Powered CAT III, CAT IV, 2100-alpha

小計（1 件）*

TWD3,888.00

(不含稅)

TWD4,082.40

訂單超過 $1,300.00 免費送貨

有庫存

加上 10 件從 2026年10月12日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD3,888.00

* 參考價格

RS庫存編號:: 836-2700
Distrelec 貨號:: 300-28-571
製造零件編號:: 2100-alpha
製造商:: Beha-Amprobe

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Beha-Amprobe
	Product Type	Voltage Tester
	Continuity Check	Yes
	Display Type	LED
	RCD Trip Test	Yes
	IP Rating	IP64
	Battery Type	AAA
	Power Source	Battery
	Weight	320g
	Minimum Operating Temperature	-15°C
	Maximum Operating Temperature	55°C
	Maximum Voltage	690V ac/dc
	Battery Life	10000Measurements
	Width	78mm
	Length	35mm
	Height	280mm
	Standards/Approvals	CE
	Hazardous Area Certification	No
	Model Number	2100-alpha
	Safety Category Level	CAT III, CAT IV
	Safety Category Voltage	600V, 690V

	選取全部
	品牌 Beha-Amprobe
	Product Type Voltage Tester
	Continuity Check Yes
	Display Type LED
	RCD Trip Test Yes
	IP Rating IP64
	Battery Type AAA
	Power Source Battery
	Weight 320g
	Minimum Operating Temperature -15°C
	Maximum Operating Temperature 55°C
	Maximum Voltage 690V ac/dc
	Battery Life 10000Measurements
	Width 78mm
	Length 35mm
	Height 280mm
	Standards/Approvals CE
	Hazardous Area Certification No
	Model Number 2100-alpha
	Safety Category Level CAT III, CAT IV
	Safety Category Voltage 600V, 690V

2100 Series Two Pole Voltage Tester

豁免

COO (Country of Origin):: CN

Fluke Voltage Tester, 690V Maximum Voltage, CAT IV Safety Category Level - 2100-alpha

This voltage tester is a battery-powered two-pole instrument designed for checking voltage and continuity in industrial and commercial environments. It detects AC and DC voltage automatically, indicates polarity and phase rotation, and includes a torch for working in low-light conditions while meeting recognised safety standards.

Features and Benefits:

• LED and LCD combine for clear voltage indication up to 1000 V
• Switchable load and buttons allow accurate RCD trip testing
• Continuity check with audible and Visual signalling for wiring faults
• Low resistance indication enables coil-free contactor checks
• Double‑insulated leads include wear indication for safety monitoring
• IP64 protection preserves function in dusty or splash conditions

Applications

• Suitable for testing distribution panels and switchgear installations
• Ideal for verifying RCD operation with 10 mA or 30 mA trips
• Used with motor control units for phase rotation checks
• Suitable for commissioning and maintenance of industrial systems
• Used for single‑pole phase testing on live installations

What battery configuration powers the unit?

It uses two AAA (IEC LR03) cells and yields over 10,000 measurements at under 5 s per measurement.

How does the device reduce false voltage readings?

Two-button switched load provides low-impedance mode to eliminate ghost voltages and a high-impedance mode for non-intrusive checks.

What environmental limits affect operation?

It operates between −15°C and 55°C and tolerates up to 95% relative humidity at altitudes up to 2,000 m.

Which safety categories and standards does it meet?

The instrument is rated to CAT IV/600 V and CAT III/690 V and complies with IEC 61243-3:2014 and EN 61243-3:2014.

What indications are provided for continuity and low resistance?

Continuity uses a Visual LED and audible tone, with low-resistance acoustic indication below specified ohm thresholds.

Standards

CAT IV 600 V, CAT III 690 V

Supplied with

Users manual, GS 38 caps, 2 x 1.5V (AAA / IEC LR03) batteries (installed).