Microchip 1 Voltage Supervisor 3-Pin TO-92, MCP130-450FI/TO
- RS庫存編號:
- 144-5867
- 製造零件編號:
- MCP130-450FI/TO
- 製造商:
- Microchip
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計（1 袋，共 1000 件）*
TWD13,600.00
(不含稅)
TWD14,280.00
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年10月23日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每袋* |
|---|---|---|
| 1000 - 4000 | TWD13.60 | TWD13,600.00 |
| 5000 + | TWD12.20 | TWD12,200.00 |
* 參考價格
- RS庫存編號:
- 144-5867
- 製造零件編號:
- MCP130-450FI/TO
- 製造商:
- Microchip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| Product Type | Voltage Supervisor | |
| Number of Supervisors | 1 | |
| Watchdog Timer | No | |
| Manual Reset | No | |
| Power Fail Detection | No | |
| Output Driver | Open Drain, Active Low | |
| Mount Type | Through Hole | |
| Package Type | TO-92 | |
| Pin Count | 3 | |
| Minimum Operating Temperature | -40°C | |
| Monitored Voltage | 4.37V | |
| Maximum Operating Temperature | 85°C | |
| Series | MCP130 | |
| Standards/Approvals | No | |
| Length | 4.95mm | |
| Width | 4.95mm | |
| Height | 3.94mm | |
| Maximum Supply Voltage | 5.5V | |
| Automotive Standard | No | |
| Minimum Supply Voltage | 1V | |
| 選取全部 | ||
|---|---|---|
品牌 Microchip | ||
Product Type Voltage Supervisor | ||
Number of Supervisors 1 | ||
Watchdog Timer No | ||
Manual Reset No | ||
Power Fail Detection No | ||
Output Driver Open Drain, Active Low | ||
Mount Type Through Hole | ||
Package Type TO-92 | ||
Pin Count 3 | ||
Minimum Operating Temperature -40°C | ||
Monitored Voltage 4.37V | ||
Maximum Operating Temperature 85°C | ||
Series MCP130 | ||
Standards/Approvals No | ||
Length 4.95mm | ||
Width 4.95mm | ||
Height 3.94mm | ||
Maximum Supply Voltage 5.5V | ||
Automotive Standard No | ||
Minimum Supply Voltage 1V | ||
- COO (Country of Origin):
- TH
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.
Features
Holds Microcontroller in Reset until supply voltage reaches stable operating level
Resets Microcontroller during power loss
Active low RESET pin
Open drain output
Internal 5 kΩ Pull-Up Resistor
Holds RESET for 350 MS (typical)
RESET to VCC = 1.0V
Accuracy of ±125 mV for 5V systems, ±75 mV for 3V systems over temperature
45 μA typical operating current
Supervisory & Reset Circuits - Microchip
相關連結
- Microchip 1 Voltage Supervisor 3-Pin TO-92, MCP130-450FI/TO
- Microchip 1 Voltage Supervisor 3-Pin TO-92, MCP130-475DI/TO
- Microchip 1 Voltage Supervisor 3-Pin TO-92, MCP130-450DI/TO
- Microchip 1 Voltage Supervisor 3-Pin TO-92, MCP120-300DI/TO
- Microchip 1 Voltage Supervisor 3-Pin 4.5 V TO-92
- Microchip 1 Voltage Supervisor 3-Pin 4.5 V TO-92, TC32MCZB
- Microchip 1 Voltage Supervisor 3-Pin 1 V TO-92, MCP100-475DI/TO
- Microchip 1 Voltage Supervisor 3-Pin 3.08 V TO-92, MCP121-315E/TO