Microchip, 1-Channel Low Dropout Voltage, Voltage Regulator, 50 mA, 5V, SOT-23 5-Pin
- RS庫存編號:
- 264-8858P
- 製造零件編號:
- TC1054-5.0VCT713
- 製造商:
- Microchip
此圖片僅供參考，請參閲產品詳細資訊及規格
暫時無法供應
我們無法確定此產品何時有貨，RS 預計將其從我們的產品目錄中移除。
- RS庫存編號:
- 264-8858P
- 製造零件編號:
- TC1054-5.0VCT713
- 製造商:
- Microchip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| Product Type | Voltage Regulator | |
| Regulator Type | Low Dropout Voltage | |
| Output Voltage | 5V | |
| Number of Outputs | 1 | |
| Line Regulation | 0.35 % | |
| Load Regulation | 0.5 % | |
| Package Type | SOT-23 | |
| Output Current | 50mA | |
| Pin Count | 5 | |
| Power Rating | 20.7mW | |
| Output Type | Fixed | |
| Length | 3.2mm | |
| Height | 1.45mm | |
| Series | TC1054 | |
| Width | 3.1mm | |
| Standards/Approvals | RoHS | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Maximum Input Voltage | 6.5V | |
| Minimum Input Voltage | 2.7V | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Microchip | ||
Product Type Voltage Regulator | ||
Regulator Type Low Dropout Voltage | ||
Output Voltage 5V | ||
Number of Outputs 1 | ||
Line Regulation 0.35 % | ||
Load Regulation 0.5 % | ||
Package Type SOT-23 | ||
Output Current 50mA | ||
Pin Count 5 | ||
Power Rating 20.7mW | ||
Output Type Fixed | ||
Length 3.2mm | ||
Height 1.45mm | ||
Series TC1054 | ||
Width 3.1mm | ||
Standards/Approvals RoHS | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Maximum Input Voltage 6.5V | ||
Minimum Input Voltage 2.7V | ||
Automotive Standard No | ||
The Microchip high accuracy CMOS LDO is an upgrades for older (bipolar) low dropout regulators. Designed specifically for battery-operated systems, the devices’ CMOS construction eliminates wasted ground current, significantly extending battery life. The key features include ultra low noise operation, very low dropout voltage and fast response to step changes in load. An error output (ERROR) is asserted when the devices are out-of-regulation (due to a low input voltage or excessive output current). ERROR can be used as a low battery warning or as a processor RESET signal (with the addition of an external RC network).
Low ground current for longer battery life
High output voltage accuracy
Power-saving shutdown mode
ERROR output can be used as a low battery detector, or processor reset generator
Over-current and over-temperature protection
Pin compatible upgrades for bipolar regulators
相關連結
- EOZ Push Button Switch Panel Mount SPST 250V ac, IP65
- Portescap Brushless DC Motor 15 V dc 9300 rpm, 3mm Shaft Diameter
- Festo Compressed Air Pipe Blue Polyurethane 6mm x 50m PUN Series, 159664
- Fluke 179 Handheld Digital Multimeter 10A ac Max 1000V ac Max
- Vishay LH1511BT Series Solid State Relay PCB Mount, 200 V ac/dc Load
- Jumo diraTRON Panel Mount PID Temperature Controller 3 Output 2 Relay 110 → 240 V
- Amphenol Industrial Pin Contacts Screw
- Honeywell Amplified Airflow Sensor AWM3000 Series