Festo, 1.4 mm nozzle, 8 bar 100 L/min, VADMI series

This vacuum generator is a Compact pneumatic device that creates suction for pick-and-place and handling operations in industrial settings. It connects to compressed Air supplies and delivers vacuum to threaded fittings while incorporating an exhaust silencer to reduce noise during operation. The unit is intended for automation and mechanical systems operating within typical industrial temperature ranges.

• Maximum suction flow 100 L/min for Faster cycle times
• Operates with supply pressure up to 8 bar for robust performance
• Nozzle diameter 1.4mm to provide focused vacuum generation
• Threaded vacuum port 1/4 G for secure piping connections
• Threaded exhaust 1/8 G with silencer to lower acoustic output
• Rated for operation between 0°C and 60°C for varied environments

• Suitable for automated pick-and-place in electronics assembly
• Ideal for gripping components on production lines in mechanical workshops
• Used with vacuum cups for PCB handling and component transfer
• Can be used for small-part handling in electrical device manufacture

Both the vacuum and exhaust ports use G-threaded fittings to match common pneumatic piping.

It meets cULus and RCM approvals indicating conformity with specified regional requirements.

An integrated threaded exhaust with a fitted silencer reduces noise and allows secure attachment.

The device is specified to operate with vacuum and supply pressures up to 8 bar, enabling high vacuum levels when combined with appropriate supply conditions.