SMC Vacuum Generator, 0.7 mm nozzle, -48 kPa 201 L/min, ZH series

This vacuum generator is a Compact pneumatic ejector designed to create vacuum from a compressed Air supply for industrial pick-and-place and holding tasks. It operates with small-bore one-touch connections and is intended for integration into automation, electronics assembly and mechanical handling systems where lightweight, inline vacuum generation is required.

• Nozzle diameter 0.7mm delivers focused suction for small loads
• Maximum vacuum −48 kPa enables secure component grip
• Supply pressure up to 0.45 MPa provides robust vacuum generation
• Supply and vacuum ports Ø6mm allow simple tubing connection
• Flow capacity 20 L/min supports moderate cycle rates
• Operates between −5 °C and 50 °C for typical industrial environments

• Suitable for pick-and-place of electronic components on assembly lines
• Ideal for vacuum grippers on Compact robotic end-effectors
• Used for holding small parts during inspection or test routines
• Suitable for vacuum supply on pneumatic transfer modules
• Can be used for temporary clamping in mechanical assembly

Soft nylon, nylon or polyurethane tubing are compatible with the one-touch Ø6mm ports.

The boxed body option is supplied without a silencer

The unit has a mass of approximately 0.012 kg, keeping inertia low for dynamic applications.

Both the pneumatic supply and exhaust use one-touch fittings sized at Ø6mm for Rapid connection.