Microchip USB5734-I/MR, Controller IC, 1-Channel 5 Gbps, 3.6 V, USB 3.0, 1.2 V, 64-Pin SQFN

此圖片僅供參考，請參閲產品詳細資訊及規格

查看所有USB Interface ICs
可享批量折扣

小計（1 件）*

TWD234.00

(不含稅)

TWD245.70

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 119 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 - 64TWD234.00
65 +TWD230.00

* 參考價格

包裝方式：
RS庫存編號:
893-8316
製造零件編號:
USB5734-I/MR
製造商:
Microchip
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Microchip

Maximum Data Rate

5Gbps

Product Type

Controller IC

Number of Transceivers

1

Sub Type

Controller

USB Specification

USB 2.0

Power Supply Type

Single

ESD Protection

Yes

Maximum Supply Voltage

3.6V

Minimum Supply Voltage

1.2V

Mount Type

Surface

Package Type

SQFN

Pin Count

64

Dual Supply Voltage

3.3V

Minimum Operating Temperature

-40°C

Supported Protocols

USB 3.0

Maximum Operating Temperature

85°C

Length

9mm

Series

USB5734

Width

9 mm

Height

1mm

Standards/Approvals

No

Automotive Standard

No

USB5734 USB 3.0 Hub Controllers


From Microchip the USB5734 is a 3.0 compliant (also known as USB 3.1 Gen 1) and supports all the defined USB speeds up to the 5 Gbps SuperSpeed (SS) data rate on all enabled downstream ports. The device integrates a USB 2.0 controller to decouple SuperSpeed data from slower USB 2.0 traffic to avoid bottlenecks slower USB 2.0 traffic can create.

The USB5734 integrates functions that would typically be associated with a separate MCU or processor; as such Microchip classifies this device as a ’Smart Hub’. For example the device can communicate to peripherals via I2C, SPI, GPIOs or UART in addition to USB. Also a downstream device can take control of the host system by swapping roles to become the host port, with the Smart Hub switching between two different hosts if required.

Features


Four downstream USB 3.0 (USB 3.1 Gen1)/2.0 ports

Integrated Hub Feature Controller (HFC) enabling I/O bridging and FlexConnect

I/O Bridging: Host communication to external peripherals - USB to I2C/UART/SPI/GPIO

FlexConnect: Host port swapping and switching to downstream devices

Battery Charging: USB-IF revision 1.2 support on downstream ports (DCP, CDP, SDP)

Simultaneous data transfer for 2500 mA of high speed charging

Port Configuration Straps: Predefined configuration of port settings – Battery Charging, Non-Removable, Disable

Application Straps: Predefined configuration of GPIOs for specific Use Cases including Mixed Mode, FlexConnect Mode, Port Speed mode, Port BC Mode and UART Mode.

ProTouch2: Configuration tool to enable enhanced OEM configuration options through either One-Time Programmable (OTP) (8Kbit) or external SPI ROM

Manufacturing line programming tool and field update capabilities

USB Link Power Management (LPM) support

IETF RFC 4122 compliant 128-bit UUID

Compatible with Microsoft® Windows® 8/8.1 and other major OS’s

USB (Universal Serial Bus) - Microchip


相關連結