FTDI Chip FT-MOD-4232HUB, USB Serial Hub Module, 480Mbps, USB 2.0, 5 V, 36-Pin

查看所有USB Interface ICs
可享批量折扣

小計（1 件）*

TWD1,415.00

(不含稅)

TWD1,485.75

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 83 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 - 4TWD1,415.00
5 +TWD1,373.00

* 參考價格

RS庫存編號:
720-3736
製造零件編號:
FT-MOD-4232HUB
製造商:
FTDI Chip
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

FTDI Chip

Number of Transceivers

1

Data Rate

480Mbps

IC Type

Transceiver IC

Protocols Supported

USB 2.0

Power Supply Type

Single

Typical Single Supply Voltage

5 V

Mounting Type

Through Hole

Pin Count

36

Dimensions

75.04 x 23.37 x 19.9mm

Height

19.9mm

Length

75.04mm

Width

23.37mm

COO (Country of Origin):
CN

USB Hi-Speed Serial/Hub Module


Designed to connect to FTDI’s V2DIPx modules, as well as any USB Host interface (e.g. PC) to expand the number of interfaces that can be accessed downstream from a Host
USB 2.0 Hi-Speed compatible
One standard Type A USB header to connect to the Host
USB Hi-Speed FT4232H device for USB-Serial/Bitbang communications. Entire USB protocol handled by USB module
USB 2.0 Hi-Speed hub controller integrated to support up to 3 downstream USB ports
USB hub controller and FT4232H are USB bus powered – no external power supply needed
External power input pin available to supply external downstream USB ports
Support for USB suspend and resume
4 Asynchronous serial interfaces available which include 2 independent MPSSE engines
Defaults to 4 RS-232 interfaces
Asynchronous Serial data transfer rates from 300 baud to 12 Mbaud at TTL levels
Synchronous Serial (MPSSE) data rates of up to 30Mbps on JTAG, SPI and I²C
One dual-port USB A socket and 0.1 inch pitch header to support up to 3 downstream USB ports
Green/Amber status LED for downstream USB port 2&3
LED indicating power supply to external downstream USB ports
Onboard EEPROM 93LC56 for FT4232H configuration
UHCI / OHCI / EHCI host controller compatible

相關連結