ROHM BD93F10MWV-E2, USB Controller, 22V, USB, 3.67 V UCSP50L2
- RS庫存編號:
- 240-3986
- 製造零件編號:
- BD93F10MWV-E2
- 製造商:
- ROHM
此圖片僅供參考，請參閲產品詳細資訊及規格
暫時無法供應
抱歉，我們不知道何時會到貨。
- RS庫存編號:
- 240-3986
- 製造零件編號:
- BD93F10MWV-E2
- 製造商:
- ROHM
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | ROHM | |
| Product Type | USB Controller | |
| Maximum Supply Voltage | 22 V | |
| Supported Protocols | USB | |
| Minimum Supply Voltage | 3.67 V | |
| Package Type | UCSP50L2 | |
| Automotive Standard | AEC-Q101 | |
| ESD Protection | No | |
| Height | 570 μm | |
| Length | 2.63 mm | |
| Maximum Operating Temperature | 150 °C | |
| Minimum Operating Temperature | -55 °C | |
| Mount Type | PCB | |
| Power Supply Type | Single | |
| Standards/Approvals | RoHS, IEC 61000-4-2 | |
| USB Specification | USB Type C | |
| Width | 2.63 mm | |
| 選取全部 | ||
|---|---|---|
品牌 ROHM | ||
Product Type USB Controller | ||
Maximum Supply Voltage 22 V | ||
Supported Protocols USB | ||
Minimum Supply Voltage 3.67 V | ||
Package Type UCSP50L2 | ||
Automotive Standard AEC-Q101 | ||
ESD Protection No | ||
Height 570 μm | ||
Length 2.63 mm | ||
Maximum Operating Temperature 150 °C | ||
Minimum Operating Temperature -55 °C | ||
Mount Type PCB | ||
Power Supply Type Single | ||
Standards/Approvals RoHS, IEC 61000-4-2 | ||
USB Specification USB Type C | ||
Width 2.63 mm | ||
The ROHM high voltage USB Type-C power controller supports USB PD using base-band communication. It includes support for the PD policy engine and communicates with an embedded controller or the SoC via host interface. It is USB Type-C Specification Ver.1.3 compatible and USB PD specification Ver.3.0 compatible.
32Bit ARM® Cortex®-M0 processor embedded
Integrated VBUS N-ch MOSFET switch gate driver
Integrated VBUS discharge switch
Protection voltage of CC pins is 28V
Supports dead battery operation
I²C Interface for host communication
相關連結
- ROHM BD93F10MWV-E2 22V 3.67 V UCSP50L2
- ROHM BD93E11GWL-E2 22V 3.67 V UCSP50L2
- ROHM Stand Alone PD Controller for Sink BD93F10MWV EVK Evaluation Kit for BD93F10MWV for Type-C Cable for Evaluation
- ROHM BD93F50MWV-E2 2-Channel 10 Gbps USB-PD, -0.3 V UQFN
- STMicroelectronics 22V USB 2.0 4.1 V, 16-Pin QFN
- STMicroelectronics STUSB4500BJR 22V I2C 3 V, 24-Pin QFN
- STMicroelectronics STUSB4710AQ1TR 22V USB 2.0 4.1 V, 16-Pin QFN
- Infineon CYPAP212A1-14SXI 22V 14-Pin SOP-14