FTDI Chip FT4222HQ-D-T, USB Controller, 3.4Mbps, 5 V, 32-Pin VQFN
- RS庫存編號:
- 196-6429
- 製造零件編號:
- FT4222HQ-D-T
- 製造商:
- FTDI Chip
此圖片僅供參考,請參閲產品詳細資訊及規格
可享批量折扣
小計(1 托盤,共 490 件)*
TWD58,751.00
(不含稅)
TWD61,691.00
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 490 件準備從其他地點送貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每托盤* |
|---|---|---|
| 490 - 1960 | TWD119.90 | TWD58,751.00 |
| 2450 + | TWD117.50 | TWD57,575.00 |
* 參考價格
- RS庫存編號:
- 196-6429
- 製造零件編號:
- FT4222HQ-D-T
- 製造商:
- FTDI Chip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | FTDI Chip | |
| Number of Transceivers | 1 | |
| Data Rate | 3.4Mbps | |
| IC Type | Controller IC | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Typical Single Supply Voltage | 5 V | |
| Mounting Type | Surface Mount | |
| Package Type | VQFN | |
| Pin Count | 32 | |
| Dimensions | 5 x 5 x 0.83mm | |
| Height | 0.83mm | |
| Length | 5mm | |
| Maximum Operating Temperature | +85 °C | |
| Width | 5mm | |
| Minimum Operating Temperature | -40 °C | |
| 選取全部 | ||
|---|---|---|
品牌 FTDI Chip | ||
Number of Transceivers 1 | ||
Data Rate 3.4Mbps | ||
IC Type Controller IC | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Typical Single Supply Voltage 5 V | ||
Mounting Type Surface Mount | ||
Package Type VQFN | ||
Pin Count 32 | ||
Dimensions 5 x 5 x 0.83mm | ||
Height 0.83mm | ||
Length 5mm | ||
Maximum Operating Temperature +85 °C | ||
Width 5mm | ||
Minimum Operating Temperature -40 °C | ||
The FT4222H is a High/Full Speed USB2.0-to-Quad SPI/I2C device controller in a compact 32-pin QFN package. The device requires an external crystal at 12MHz in order for the internal PLL to operate. It supports multi-voltage IO: 1.8/2.5 and 3.3V and provides 128 bytes one-time-programmable (OTP) memory space for storing vendor-specific information.
This device contains both SPI and I2C configurable interfaces. The SPI interface can be configured as master mode with single, dual and quad bits data width transfer, or slave mode with single bit data width transfer. The I2C interface can be configured in master or slave mode.
The FT4222H is available in in a space saving Pb-free 32-pin QFN package.
This device contains both SPI and I2C configurable interfaces. The SPI interface can be configured as master mode with single, dual and quad bits data width transfer, or slave mode with single bit data width transfer. The I2C interface can be configured in master or slave mode.
The FT4222H is available in in a space saving Pb-free 32-pin QFN package.
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
相關連結
- FTDI Chip FT4222HQ-D-T 3.4Mbps 32-Pin VQFN
- FTDI Chip FT260Q-T 3.4Mbps I2C USB 2.0 2.5 V 5 V, 28-Pin WQFN
- FTDI Chip FT231XQ-T USB 2.0 20-Pin QFN
- FTDI Chip FT240XQ-T USB 2.0 24-Pin QFN
- FTDI Chip FT234XD-T USB 2.0 12-Pin DFN
- FTDI Chip FT2232H-56Q-TRAY 30Mbps 1.8 V 56-Pin VQFN
- FTDI Chip FT4232H-56Q-TRAY 30Mbps 1.8 V 56-Pin VQFN
- FTDI Chip FT602Q-B-T 480Mbps 3.3 V, 76-Pin QFN
