Microchip USB3300-EZK-TR, USB Transceiver, 3-Channel, 3.3 V, UTMI + ULPI, OTG, USB 2.0, 3.3 V, 32-Pin QFN
- RS庫存編號:
- 177-9859
- 製造零件編號:
- USB3300-EZK-TR
- 製造商:
- Microchip
此圖片僅供參考,請參閲產品詳細資訊及規格
可享批量折扣
小計(1 包,共 10 件)*
TWD559.00
(不含稅)
TWD587.00
(含稅)
添加 30 件 件可免費送貨
有庫存
- 3,470 件準備從其他地點送貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 10 - 1240 | TWD55.90 | TWD559.00 |
| 1250 + | TWD54.60 | TWD546.00 |
* 參考價格
- RS庫存編號:
- 177-9859
- 製造零件編號:
- USB3300-EZK-TR
- 製造商:
- Microchip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| Number of Transceivers | 3 | |
| Product Type | USB Transceiver | |
| Sub Type | Transceiver | |
| USB Specification | USB 2.0 | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Maximum Supply Voltage | 3.3V | |
| Minimum Supply Voltage | 3.3V | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Pin Count | 32 | |
| Minimum Operating Temperature | -40°C | |
| Supported Protocols | UTMI + ULPI, OTG, USB 2.0 | |
| Maximum Operating Temperature | 85°C | |
| Length | 5.1mm | |
| Width | 5.1 mm | |
| Height | 0.95mm | |
| Series | USB3300 | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Microchip | ||
Number of Transceivers 3 | ||
Product Type USB Transceiver | ||
Sub Type Transceiver | ||
USB Specification USB 2.0 | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Maximum Supply Voltage 3.3V | ||
Minimum Supply Voltage 3.3V | ||
Mount Type Surface | ||
Package Type QFN | ||
Pin Count 32 | ||
Minimum Operating Temperature -40°C | ||
Supported Protocols UTMI + ULPI, OTG, USB 2.0 | ||
Maximum Operating Temperature 85°C | ||
Length 5.1mm | ||
Width 5.1 mm | ||
Height 0.95mm | ||
Series USB3300 | ||
Standards/Approvals No | ||
Automotive Standard No | ||
- COO (Country of Origin):
- TW
The USB3300 is an industrial temperature Hi-Speed USB Physical Layer Transceiver (PHY). The USB3300 uses a low pin count interface (ULPI) to connect to a ULPI compliant Link layer. The ULPI interface reduces the UTMI+ interface from 54 pins to 12 pins using a method of in-band signaling and status byte transfers between the Link and PHY. This PHY was designed from the start with the ULPI interface. No UTMI to ULPI wrappers are used in this design which provides a seamless ULPI to Link interface. The result is a PHY with a low latency transmit and receive time.
USB-IF Hi-Speed
Latch-Up performance exceeds 150 mA
ESD protection levels of ±8kV HBM without external protection devices
Includes full support for the optional On-The-Go (OTG) protocol
Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)
Allows host to turn VBUS off to conserve battery power in OTG applications
Internal 1.8 volt regulators allow operation from a single 3.3 volt supply
相關連結
- Microchip 3-Channel UTMI + ULPI USB 2.0 32-Pin QFN
- Microchip USB3300-EZK 1-Channel USB 2.0 32-Pin QFN
- Microchip 1-Channel USB 2.0 32-Pin QFN
- Microchip USB3320C-EZK 1-Channel 480 Mbps USB 2.0 32-Pin QFN
- Microchip USB3320C-EZK-TR 1-Channel USB 2.0 32-Pin QFN
- Microchip USB3340-EZK-TR 1-Channel 480 Mbps USB 2.0 32-Pin QFN
- Microchip LAN8710AI-EZK-ABC 3.3 V 100 Mbps, 32-Pin 3.3 V QFN
- Microchip 1-Channel 480 Mbps USB 2.0 32-Pin QFN
