Microchip USB2422/MJ, USB Controller, USB 2.0, 3.3 V, 24-Pin SQFN

查看所有USB Interface ICs
可享批量折扣

小計（1 包，共 5 件）*

TWD226.00

(不含稅)

TWD237.30

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 1,900 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
每包*
5 - 120TWD45.20TWD226.00
125 +TWD44.20TWD221.00

* 參考價格

包裝方式：
RS庫存編號:
177-9718
製造零件編號:
USB2422/MJ
製造商:
Microchip
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Microchip

Protocols Supported

USB 2.0

IC Type

Controller IC

Power Supply Type

Single

ESD Protection

Yes

Typical Single Supply Voltage

3.3 V

Mounting Type

Surface Mount

Package Type

SQFN

Pin Count

24

Dimensions

4.1 x 4.1 x 0.95mm

Height

0.95mm

Length

4.1mm

Maximum Operating Temperature

+70 °C

Minimum Operating Temperature

0 °C

Width

4.1mm

The Microchip USB2422 hub is a low-power, single transaction translator, hub controller IC with two downstream ports for embedded USB solutions. The Microchip hub controller can attach to an upstream port as a Hi-Speed and Full-Speed hub or as a Full-Speed only hub. The Microchip hub supports Low-Speed, Full-Speed, and Hi-Speed (when configured as a Hi-Speed hub) downstream devices on the enabled downstream ports.

High performance, low-power, small footprint hub controller IC with two downstream ports
Optimized for minimal bill-of-materials and low-cost designs
Supports the USB Battery Charging Specification, Revision 1.1
Fully integrated USB termination and pull-up/pulldown resistors
Supports a single external 3.3 V supply source, internal regulators provide 1.2 V internal core voltage
On-chip driver for 24 MHz crystal resonator or external 24 MHz clock input
ESD protection up to 6 kV on all USB pins

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


相關連結