FTDI Chip 1-Channel UART RS232, RS422, UART, RS485, SIE 16-Pin QFN, FT230XQ-R
- RS庫存編號:
- 757-0026P
- 製造零件編號:
- FT230XQ-R
- 製造商:
- FTDI Chip
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計 1250 件 (以卷裝提供)*
TWD89,375.00
(不含稅)
TWD93,850.00
(含稅)
庫存資訊目前無法存取 - 請稍後再回來查看
單位 | 每單位 |
|---|---|
| 1250 - 2498 | TWD71.50 |
| 2500 + | TWD70.00 |
* 參考價格
- RS庫存編號:
- 757-0026P
- 製造零件編號:
- FT230XQ-R
- 製造商:
- FTDI Chip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | FTDI Chip | |
| Product Type | UART | |
| Number of Channels | 1 | |
| Standard Supported | RS232, RS422, UART, RS485, SIE | |
| Transmit FIFO | 512bit | |
| Receive FIFO | 512bit | |
| Maximum Data Rate | 3MBd | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Pin Count | 16 | |
| Maximum Supply Voltage | 3.3V | |
| Minimum Supply Voltage | 5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Height | 0.8mm | |
| Series | FT230X | |
| Length | 4mm | |
| Standards/Approvals | No | |
| Width | 4 mm | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 FTDI Chip | ||
Product Type UART | ||
Number of Channels 1 | ||
Standard Supported RS232, RS422, UART, RS485, SIE | ||
Transmit FIFO 512bit | ||
Receive FIFO 512bit | ||
Maximum Data Rate 3MBd | ||
Mount Type Surface | ||
Package Type QFN | ||
Pin Count 16 | ||
Maximum Supply Voltage 3.3V | ||
Minimum Supply Voltage 5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Height 0.8mm | ||
Series FT230X | ||
Length 4mm | ||
Standards/Approvals No | ||
Width 4 mm | ||
Automotive Standard No | ||
FT230X, FT231X, FT234XD - Full Speed USB to UART, FTDI Chip
The FTDI Chip FT230X and FT234XD are Ful Speed USB to basic serial UART interface devices. The FT231X is a Full Speed USB to Full Handshake UART interface.
They have a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component count.
Capable of operating up to 3 MBaud, with low power consumption (8 mA), all USB to UART devices operate efficiently with USB host controllers. They use as little bandwidth as possible.
The FT230X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface.
- Fully integrated MTP memory, clock generation, AVCC filtering, Power-On Reset (POR) and LDO regulators.
- Configurable CBUS I/O Pin Options.
- Asynchronous and Synchronous Bit Bang Modes.
- Operates at between +3.3 V and +5.25 V. A nominal operational mode current of 8 mA and a nominal USB suspend mode current of 125 μA.