製造零件編號

RS PRO 115 V ac, 230 V ac 2 x 15 V ac Toroidal Transformer 2 Output 30 VA, IEC61558 Class II, VDE0570 Class II, EN61558

RS庫存編號:: 671-9072
製造商:: RS PRO

RS PRO 115 V ac, 230 V ac 2 x 15 V ac Toroidal Transformer 2 Output 30 VA, IEC61558 Class II, VDE0570 Class II, EN61558

此圖片僅供參考，請參閲產品詳細資訊及規格

可享批量折扣

小計（1 件）*

TWD905.00

(不含稅)

TWD950.25

訂單超過 $1,300.00 免費送貨

暫時缺貨

1 件從 2026年6月01日起裝運發貨
加上 30 件從 2026年7月06日起發貨
加上 30 件從 2026年11月23日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 - 7	TWD905.00
8 +	TWD883.00

* 參考價格

RS庫存編號:: 671-9072
製造商:: RS PRO

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	RS PRO
	Product Type	Toroidal Transformer
	Primary Voltage	115 V ac, 230 V ac
	Secondary Voltage	2 x 15 V ac
	Number of Outputs	2
	Secondary Current	1A
	Power	30VA
	Weight	0.503kg
	Diameter	70mm
	Minimum Operating Frequency	50Hz
	Maximum Operating Frequency	60Hz
	Winding Type	Secondary Winding, Primary Winding
	Height	32mm
	Termination Type	Lead
	Standards/Approvals	IEC61558 Class II, VDE0570 Class II, EN61558 Class II, UL506

	選取全部
	品牌 RS PRO
	Product Type Toroidal Transformer
	Primary Voltage 115 V ac, 230 V ac
	Secondary Voltage 2 x 15 V ac
	Number of Outputs 2
	Secondary Current 1A
	Power 30VA
	Weight 0.503kg
	Diameter 70mm
	Minimum Operating Frequency 50Hz
	Maximum Operating Frequency 60Hz
	Winding Type Secondary Winding, Primary Winding
	Height 32mm
	Termination Type Lead
	Standards/Approvals IEC61558 Class II, VDE0570 Class II, EN61558 Class II, UL506

登入下載 CAD 模型

Toroid open wound dual 115V primary

High quality open style toroidal transformers with dual 115Vac 50/60Hz primary windings and twin secondary windings which may be connected in series or parallel or used independently.

Features & Benefits

• Small size and low weight compared with traditional stacked lamination types;• Extremely low level of radiated magnetic field;• Very low induced noise (hum);• Very low iron loss;• Double insulated primary leads

Note

Mounting hardware is not supplied, available seperately

Warning

Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.