Nuvotem Talema 230 V ac 2 x 12 V ac Toroidal Transformer 2 Output 80 VA, UL 5085, UL 506, EN 60065

RS庫存編號:: 223-7967
製造零件編號:: 0080P1-2-012
製造商:: Nuvotem Talema

Nuvotem Talema 230 V ac 2 x 12 V ac Toroidal Transformer 2 Output 80 VA, UL 5085, UL 506, EN 60065

可享批量折扣

小計（1 件）*

TWD1,747.00

(不含稅)

TWD1,834.35

訂單超過 $1,300.00 免費送貨

有庫存

加上 5 件從 2026年2月23日起發貨
加上 75 件從 2026年3月23日起發貨
加上 75 件從 2026年5月04日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 - 24	TWD1,747.00
25 +	TWD1,660.00

* 參考價格

RS庫存編號:: 223-7967
製造零件編號:: 0080P1-2-012
製造商:: Nuvotem Talema

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Nuvotem Talema
	Product Type	Toroidal Transformer
	Primary Voltage	230 V ac
	Secondary Voltage	2 x 12 V ac
	Number of Outputs	2
	Secondary Current	3.33 A
	Weight	900g
	Power	80VA
	Diameter	93 mm
	Maximum Operating Frequency	450Hz
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	120°C
	Height	38mm
	Termination Type	Copper Conductor Termination Wire
	Standards/Approvals	UL 5085, UL 506, EN 60065

	選取全部
	品牌 Nuvotem Talema
	Product Type Toroidal Transformer
	Primary Voltage 230 V ac
	Secondary Voltage 2 x 12 V ac
	Number of Outputs 2
	Secondary Current 3.33 A
	Weight 900g
	Power 80VA
	Diameter 93 mm
	Maximum Operating Frequency 450Hz
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 120°C
	Height 38mm
	Termination Type Copper Conductor Termination Wire
	Standards/Approvals UL 5085, UL 506, EN 60065

Datasheet

Open Style with Leads, 15VA to 1000VA

High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.

Small size and low weight compared with traditional stacked lamination types

Extremely low level of radiated magnetic field and very low induced noise (hum)

Very low iron losses

Double insulated primary leads

100% electrical and flash tested

High-quality manufacturing and testing in accordance to EN61558, EN60950, EN60065, VDE 0551, VDE 0550 and BS415

Warning

Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.

Approvals

UL 506; EN 61558

Standards