RS PRO Toggle Switch, PCB Mount, On-On-On, DPDT, Solder Terminal, 28 V dc, 250 V ac
- RS庫存編號:
- 820-0523
- Distrelec 貨號:
- 304-17-840
- 製造商:
- RS PRO
可享批量折扣
小計（1 件）*
TWD235.00
(不含稅)
TWD246.75
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 106 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 9 | TWD235.00 |
| 10 - 24 | TWD228.00 |
| 25 - 49 | TWD221.00 |
| 50 - 249 | TWD217.00 |
| 250 + | TWD213.00 |
* 參考價格
- RS庫存編號:
- 820-0523
- Distrelec 貨號:
- 304-17-840
- 製造商:
- RS PRO
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | RS PRO | |
| Product Type | Toggle Switch | |
| Contact Configuration | DPDT | |
| Switch Operation | On-On-On | |
| Switch Contact Current | 5 A | |
| Mount Type | PCB | |
| Terminal Type | Solder | |
| IP Rating | IP67 | |
| Actuator Length | 18mm | |
| Minimum Operating Temperature | -30°C | |
| Contact AC Voltage | 250V ac | |
| Contact DC Voltage | 28V dc | |
| Maximum Operating Temperature | 85°C | |
| Switch Configuration | On-On-On | |
| Actuator Material | Brass | |
| Series | 100h | |
| Width | 14.48 mm | |
| Length | 16mm | |
| Height | 40.2mm | |
| Standards/Approvals | MIL-STD-202F | |
| Mechanical Life | 50000Cycles | |
| 選取全部 | ||
|---|---|---|
品牌 RS PRO | ||
Product Type Toggle Switch | ||
Contact Configuration DPDT | ||
Switch Operation On-On-On | ||
Switch Contact Current 5 A | ||
Mount Type PCB | ||
Terminal Type Solder | ||
IP Rating IP67 | ||
Actuator Length 18mm | ||
Minimum Operating Temperature -30°C | ||
Contact AC Voltage 250V ac | ||
Contact DC Voltage 28V dc | ||
Maximum Operating Temperature 85°C | ||
Switch Configuration On-On-On | ||
Actuator Material Brass | ||
Series 100h | ||
Width 14.48 mm | ||
Length 16mm | ||
Height 40.2mm | ||
Standards/Approvals MIL-STD-202F | ||
Mechanical Life 50000Cycles | ||
- COO (Country of Origin):
- TW
IP67 Sealed Miniature Toggle Switches - RS Series
These full sealed switches feature a double shell case for added mechanical strength and high electrical insulation. The switches have a two 'O' ring frontal seals that maintain the seal during operation. The rear of the switch is also fully sealed allowing full protection from flowing water.The contacts are suitable for both low level switching (10mA 50mV - 10μA, 5Vdc minimum) and power applications (3A @ 250Vac).
相關連結
- RS PRO Toggle Switch On-(On) Solder Terminal
- RS PRO Toggle Switch (On)-On Solder Terminal
- RS PRO Toggle Switch On-On Solder Terminal
- RS PRO Toggle Switch On-On-(On) Solder Terminal
- RS PRO Toggle Switch (On)-On-(On) Solder Terminal
- RS PRO Toggle Switch On-Off-On Solder Terminal
- RS PRO Toggle Switch On-Off-(On) Solder Terminal
- RS PRO Toggle Switch (On)-Off-(On) Solder Terminal