OPTIBELT 130 XL 037 Timing Belt 65 Teeth, 330.2 mm Length, 9.4 mm Width
- RS庫存編號:
- 204-3178
- 製造零件編號:
- 130 XL 037
- 製造商:
- OPTIBELT
可享批量折扣
小計（1 件）*
TWD176.00
(不含稅)
TWD184.80
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 57 件從 2026年4月27日 起發貨
- 加上 1 件從 2026年5月05日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 12 | TWD176.00 |
| 13 - 24 | TWD171.00 |
| 25 + | TWD166.00 |
* 參考價格
- RS庫存編號:
- 204-3178
- 製造零件編號:
- 130 XL 037
- 製造商:
- OPTIBELT
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | OPTIBELT | |
| Product Type | Timing Belt | |
| Belt Section | XL | |
| Pitch | 5.08mm | |
| Number of Teeth | 65 | |
| Cord Material | Glass | |
| Material | Rubber | |
| Series | ZR | |
| Belt Length | 330.2mm | |
| Minimum Operating Temperature | -30°C | |
| Pitch Length | 5.08mm | |
| Belt Width | 9.4mm | |
| Maximum Operating Temperature | 100°C | |
| Standards/Approvals | ISO 5296/ISO 5294 | |
| 選取全部 | ||
|---|---|---|
品牌 OPTIBELT | ||
Product Type Timing Belt | ||
Belt Section XL | ||
Pitch 5.08mm | ||
Number of Teeth 65 | ||
Cord Material Glass | ||
Material Rubber | ||
Series ZR | ||
Belt Length 330.2mm | ||
Minimum Operating Temperature -30°C | ||
Pitch Length 5.08mm | ||
Belt Width 9.4mm | ||
Maximum Operating Temperature 100°C | ||
Standards/Approvals ISO 5296/ISO 5294 | ||
The Optibelt Timing Belt has 330mm pitch length. The linear belts with trapezoidal profile is manufactured from sleeves in a spiral cut method. This open-ended timing belts are reinforced with glass cord.
Pitch length 330mm
High level of tensile strength
Maximum angle misalignment of 0.67° (depending on width)
Maintenance-free
Established worldwide
For low levels of strain
Section standardised: ISO 5296 / ISO 5294
Standard roll length: 30 m
相關連結
- SKF PHG 130-XL-037 Timing Belt 65 Teeth 9.4 mm Width
- Contitech 130 XL 037 Timing Belt 65 Teeth 9.4 mm Width
- OPTIBELT 260 XL 037 Timing Belt 130 Teeth 9.4 mm Width
- OPTIBELT 130 XL 025 Timing Belt 65 Teeth 6.35 mm Width
- OPTIBELT 130 XL 031 Timing Belt 65 Teeth 7.87 mm Width
- SKF PHG 260-XL-037 Timing Belt 130 Teeth 9.4 mm Width
- OPTIBELT 270 XL 037 Timing Belt 135 Teeth 9.4 mm Width
- OPTIBELT 134 XL 037 Timing Belt 67 Teeth 9.4 mm Width