Dormer Threading Tap, M3.5 Thread, 0.6mm Pitch, Metric Standard, Machine Tap
- RS庫存編號:
- 240-3142
- 製造零件編號:
- E500 3.5 X 0.60 3FL BOTT
- 製造商:
- Dormer
單價 個**
TWD589.00
(不含稅)
TWD618.45
(含稅)
11 現貨庫存,可於6工作日發貨。*
* 交貨日期可能會根據您選擇的數量和交貨地址而變更。
訂單金額滿 TWD2,857.00 (未稅) 即可享受 免費 送貨服務
單位 | 每單位 |
---|---|
1 + | TWD589.00 |
** 參考價格
- RS庫存編號:
- 240-3142
- 製造零件編號:
- E500 3.5 X 0.60 3FL BOTT
- 製造商:
- Dormer
不適用
HSS Straight Flute Metric Coarse Hand Tap (E500)
HSS Straight Flute hand tap for producing metric coarse threads in most materials.
Features and Benefits:
Suitable for tapping repeatable tolerance threads in through or blind holes by hand or machine
7° cutting rake angle
Bright finish
7° cutting rake angle
Bright finish
Typical Applications
Taps and dies are used to create screw threads (commonly known as threading). Taps make nuts and a die makes a bolt. Forming threads using a tap is known as tapping, but using a die calls the process threading. Threading taps are used in:
Engineering
Manufacturing
Engineering
Manufacturing
FAQs
What is HSS?
An acronym for High-speed steel, HSS is generally the go-to type of steel needed for tap and drill bits due to their excellent heat resistance at high speeds. As a standard drill can spin upwards of around 500 - 700rpm, the friction can cause a substantial build-up of heat. Something which would not be wanted when working with wood and plastic.
What are the different types of threading taps?
The four most popular ones are:
Straight Flute Taps: most commonly used type of tap and suitable for blind or though hole thread production in most materials, mainly steel and cast iron. These collect chips in the straight flutes of the tool.
Spiral Point Taps: suitable for threading through holes. They push chips through holes ahead of the tool.
Spiral Flute Taps: intended primarily for threading blind holes. They pull chips back from the tip of the tool and up and out of the hole.
Forming Taps: produce a thread by pressing the material rather than cutting and no chips are created.
These Dormer taps are Straight Flute Taps. Straight flute taps and be used by hand and they can also be used in a machine if needed.
What is HSS?
An acronym for High-speed steel, HSS is generally the go-to type of steel needed for tap and drill bits due to their excellent heat resistance at high speeds. As a standard drill can spin upwards of around 500 - 700rpm, the friction can cause a substantial build-up of heat. Something which would not be wanted when working with wood and plastic.
What are the different types of threading taps?
The four most popular ones are:
Straight Flute Taps: most commonly used type of tap and suitable for blind or though hole thread production in most materials, mainly steel and cast iron. These collect chips in the straight flutes of the tool.
Spiral Point Taps: suitable for threading through holes. They push chips through holes ahead of the tool.
Spiral Flute Taps: intended primarily for threading blind holes. They pull chips back from the tip of the tool and up and out of the hole.
Forming Taps: produce a thread by pressing the material rather than cutting and no chips are created.
These Dormer taps are Straight Flute Taps. Straight flute taps and be used by hand and they can also be used in a machine if needed.
Standards
Manufactured to ISO529
Standards
ISO529
Contents
7777
Engineering Taps - Straight Flute (Dormer)
Precision HSS taps to ISO529 designed to produce repeatable tolerance threads in most engineering materials. Suitable for medium/high rate production. All taps are to tolerance class 2, giving 6H fit (metric taps) or 2B fit (UNF & UNC taps)
屬性 | 值 |
---|---|
Thread Size | M3.5 |
Set Type | Threading Tap |
Type | Straight Flute, Plug |
Pitch | 0.6mm |
Thread Standard | Metric |
Thread Direction | Right Hand |
Overall Length | 50 mm |
Number of Pieces | 1 |
Material | HSS |
Hand/Machine Tap | Machine Tap |
Shank Diameter | 3.55 mm |
Class of Fit | 6H |