Keenserts Thread Repair Insert, Drill Size 9.5 mm

查看所有Thread Repair Inserts

小計（1 袋，共 5 件）*

TWD1,377.00

(不含稅)

TWD1,445.85

(含稅)

Add to Basket
選擇或輸入數量
暫時缺貨
  • 從 2026年4月06日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
袋
每袋
每單位*
1 +TWD1,377.00TWD275.40

* 參考價格

RS庫存編號:
668-4676
製造零件編號:
KNM8X1.25
製造商:
Keenserts
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Keenserts

Product Type

Thread Repair Insert

Drill Size

9.5 mm

Thread Length

12mm

Material

303 Stainless Steel

Standards/Approvals

ISO/TS 16949: 2002DIN EN ISO 14001 : 2005EN 2516

豁免

COO (Country of Origin):
DE

Keenserts Inserts


The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.

Drilling and tapping can be done without any specialist equipment, just standard drills and taps.

Manufactured from stainless steel

Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials

In thread repair use, the defect thread can be replaced with the same nominal diameter

Significantly increases load capability in weaker materials

Special keys lock the Keensert into place eliminating rotation

Easy to install no special taps required and no tangs to remove

High resistance to torque out and pull out

Camloc Inserts & Tools available in lightweight & heavy duty versions

KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711

The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.

Drilling and tapping can be done without any specialist equipment, just standard drills and taps.

For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

相關連結