小計（1 件）*
TWD6,190.00
(不含稅)
TWD6,499.50
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 7 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD6,190.00 |
* 參考價格
- RS庫存編號:
- 880-1407
- 製造零件編號:
- FTP-1
- 製造商:
- Fluke
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Fluke | |
| Product Type | Test Probe | |
| Voltage | 1000 V | |
| Colour | Red, Black | |
| Current | 10A | |
| Probe Tip Type | Threaded | |
| Tip Size | 2 mm | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 50°C | |
| Standards/Approvals | CAT IV 600 V, CAT III 1000 V | |
| 選取全部 | ||
|---|---|---|
品牌 Fluke | ||
Product Type Test Probe | ||
Voltage 1000 V | ||
Colour Red, Black | ||
Current 10A | ||
Probe Tip Type Threaded | ||
Tip Size 2 mm | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 50°C | ||
Standards/Approvals CAT IV 600 V, CAT III 1000 V | ||
豁免
- COO (Country of Origin):
- TW
Fluke FTP-1 Fused Test Probe Set
Brought to you by Fluke, these SureGrip fused test probes have built-in replaceable fuses for additional measurement protection. Rated to CAT III 1000V, each probe has removable tip guards for reduced probe tip exposure. All models are highly reliable and excellent quality.
Features and Benefits
• Built-in fuses for additional measurement protection
• Fluke fuse 1000 V, 11 A with 20 kA interrupt rating
• 2mm threaded probe tips include removable 4 mm spring contacts and removable insulated caps for probing closely spaced leads
• CAT III 1000 V, CAT IV 600 V, 10 A rating
• Operating temperature -20°C to 50°C (-5°F to 120°F)
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
What are the differences between safety categories?
For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT I, CAT II), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT II 1000 V, provides a higher degree of protection than a CAT II 400 V probe.