小計（1 件）*
TWD11,130.00
(不含稅)
TWD11,686.50
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 2 件從 2026年9月07日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD11,130.00 |
* 參考價格
Sponsored
- RS庫存編號:
- 642-976
- 製造商:
- RS PRO
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | RS PRO | |
| Lead Length | 1100mm | |
| Product Type | Test Lead | |
| Colour | Red, Black | |
| Test Lead Type | Clip Connector Test Lead | |
| Voltage | 80V | |
| Standards/Approvals | RoHS, ISO 9001 | |
| 選取全部 | ||
|---|---|---|
品牌 RS PRO | ||
Lead Length 1100mm | ||
Product Type Test Lead | ||
Colour Red, Black | ||
Test Lead Type Clip Connector Test Lead | ||
Voltage 80V | ||
Standards/Approvals RoHS, ISO 9001 | ||
- COO (Country of Origin):
- CN
The RS Pro Test Leads are suitable for battery testers. The offsetting connection for 3 point connection is done by finding the short-circuit screw in the middle of the short-circuit board as center. Find two holes on left and right of the center which has the same distance between the two ends of the battery under test. Then insert the SENSE pins into the holes and press down the probes to let the SOURCE touch the copper foil on the PCB board to complete the 3-point connection. When performing offsetting, it is necessary to keep the probe and the short circuit board in good contact condition to avoid shaking and affect the measurement results.
4 Wire Type
Length is 1100 mm approx
Connection is Single Pin
For voltages up to 80V Max
相關連結
- RS PRO Test Lead Black 1100 mm Lead Length
- RS PRO Test Lead Black, 1.1 m Lead Length
- RS PRO Test Lead 15A Black 59 mm Lead Length
- RS PRO Test Lead 5A Red 2 m Lead Length
- RS PRO Test Lead 5A Red 45 mm Lead Length
- Chauvin Arnoux Test Lead Red, 3 m Lead Length
- Telegartner BNC Test Lead Red, 1 m Lead Length
- Telegartner BNC Test Lead Red, 500 mm Lead Length