CAL MAXVU16 DIN Rail PID Temperature Controller 1 Input, 3 Output Relay 24V ac Temperature Control

RS庫存編號:: 877-2053
製造零件編號:: AL MV160MRR021U0
製造商:: CAL

CAL MAXVU16 DIN Rail PID Temperature Controller 1 Input, 3 Output Relay 24V ac Temperature Control

查看所有Temperature Controllers

小計（1 件）*

TWD6,424.00

(不含稅)

TWD6,745.20

(含稅)

訂單超過 $1,300.00 免費送貨

有庫存

15 件準備從其他地點送貨
加上 6 件從 2026年11月16日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD6,424.00

* 參考價格

RS庫存編號:: 877-2053
製造零件編號:: AL MV160MRR021U0
製造商:: CAL

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	CAL
	Output Type	Relay
	Product Type	PID Temperature Controller
	Number of Inputs	1
	Number of Outputs	3
	Maximum Current	2A
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	55°C
	Control Type	Temperature Control
	Maximum Supply Voltage	24V ac
	Digital Comms	RS485 Modbus RTU
	Maximum Voltage	250V
	Display Type	4 Digit
	IP Rating	IP20, IP65
	Standards/Approvals	UL61010-1, EN61326, EN61010-1, CE
	Length	48mm
	Input Type	Thermocouple
	Mount Type	DIN Rail
	Series	MAXVU16
	Panel Depth	67mm

	選取全部
	品牌 CAL
	Output Type Relay
	Product Type PID Temperature Controller
	Number of Inputs 1
	Number of Outputs 3
	Maximum Current 2A
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 55°C
	Control Type Temperature Control
	Maximum Supply Voltage 24V ac
	Digital Comms RS485 Modbus RTU
	Maximum Voltage 250V
	Display Type 4 Digit
	IP Rating IP20, IP65
	Standards/Approvals UL61010-1, EN61326, EN61010-1, CE
	Length 48mm
	Input Type Thermocouple
	Mount Type DIN Rail
	Series MAXVU16
	Panel Depth 67mm

COO (Country of Origin):: GB

CAL Temperature Controller

The CAL MAXVU16 series temperature controller has a supply voltage rating ranging from 100VAC to 240VAC. This controller has a width of 48mm and a height of 48mm (1/16 DIN) device. The controller has 2 relay output. It is an easy-to-install device that is fast to program with improved display visibility. This provides an affordable solution for applications where primary temperature control functions such as heat only or heat/cool are needed. Typical applications include packaging processes such as sealers and many more.

Features and Benefits

2 process alarms- high/low, deviation or band

2 x 4 digit display and 3 output status LEDs

3 button operation

Front panel configuration or PC configuration software

Good performance in sunlight

High visibility 18mm display (10.2mm lower display)

Quick set-up menu with TOP 10 configuration parameters

RS485 Modbus RTU communications

Thermocouple, PT100 or linear DC sensor input

User can set-up the controller in 60 seconds

Wide viewing angle

Certifications

CE certified

EN61010-1

EN61326 (susceptibility and emissions)

Installation category II

IP65 rated

UL61010-1 pollution degree 2

Part Number Information

Some products in this range may be supplied with a part number containing the digit "9" (for example, xxxxx029U0) rather than the manufacturer part number shown in the datasheet (for example, xxxxx021U0).

The part number containing the digit "9" identifies the multilingual documentation variant supplied by the manufacturer. These products are functionally equivalent to the corresponding manufacturer part numbers referenced in the datasheets, with no differences to product performance or specification.