Carlo Gavazzi RGC1P DIN Rail Power Controller Solid State/AC 250V Analogue
- RS庫存編號:
- 125-0690
- Distrelec 貨號:
- 300-76-698
- 製造零件編號:
- RGC1P23V42ED
- 製造商:
- Carlo Gavazzi
小計(1 件)*
TWD8,806.00
(不含稅)
TWD9,246.30
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 13 件準備從其他地點送貨
- 加上 4 件從 2026年4月09日 起發貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD8,806.00 |
* 參考價格
- RS庫存編號:
- 125-0690
- Distrelec 貨號:
- 300-76-698
- 製造零件編號:
- RGC1P23V42ED
- 製造商:
- Carlo Gavazzi
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Carlo Gavazzi | |
| Output Type | Solid State/AC | |
| Product Type | Power Controller | |
| Maximum Current | 63A | |
| Maximum Operating Temperature | 70°C | |
| Minimum Operating Temperature | -40°C | |
| Control Type | Analogue | |
| Terminal Type | Screw | |
| Maximum Supply Voltage | 250V | |
| Firing Mode | Phase Angle, 16x Full Cycle, 1x Full Cycle, Soft Starting, Advanced Full Cycle, 4x Full Cycle | |
| Maximum Voltage | 1200V | |
| Display Type | LED | |
| Standards/Approvals | EN 60947-4-3, RoHS (2011/65/EU), EN50155, EN61373, UL508, cUL (CSA 22.2 No.14-13) | |
| IP Rating | IP20 | |
| Length | 35.8mm | |
| Width | 103.5 mm | |
| Series | RGC1P | |
| Input Type | Analogue | |
| Mount Type | DIN Rail | |
| Panel Depth | 99mm | |
| 選取全部 | ||
|---|---|---|
品牌 Carlo Gavazzi | ||
Output Type Solid State/AC | ||
Product Type Power Controller | ||
Maximum Current 63A | ||
Maximum Operating Temperature 70°C | ||
Minimum Operating Temperature -40°C | ||
Control Type Analogue | ||
Terminal Type Screw | ||
Maximum Supply Voltage 250V | ||
Firing Mode Phase Angle, 16x Full Cycle, 1x Full Cycle, Soft Starting, Advanced Full Cycle, 4x Full Cycle | ||
Maximum Voltage 1200V | ||
Display Type LED | ||
Standards/Approvals EN 60947-4-3, RoHS (2011/65/EU), EN50155, EN61373, UL508, cUL (CSA 22.2 No.14-13) | ||
IP Rating IP20 | ||
Length 35.8mm | ||
Width 103.5 mm | ||
Series RGC1P | ||
Input Type Analogue | ||
Mount Type DIN Rail | ||
Panel Depth 99mm | ||
- COO (Country of Origin):
- MT
RGC1P Series SSR Power Controllers
The RGC1P series of power controllers are supplied with integrated heatsink and are used to control output power of single phase loads with an analogue control input. Switching modes are selectable using a knob on the front of the controller and allows phase angle control, full cycle control, advanced full cycle control and soft starting.
The output of the RGC1P power controllers is protected against overvoltages by an integrated varistor across the output.
Features and Benefits
• 1-pole analogue switching AC solid-state contactors
• Integrated heatsink
• Selectable modes of operation;
- Phase angle
- Full cycle x1, x4 or x16
- Advanced full cycle specific for short wave infrared heaters
- Soft starting for limiting inrush current of loads having a high temperature coefficient
• Rated operational voltage up to 660 V ac
• Rated operation current up to 63 A ac
• Control inputs: 4-20 mA, 0-5 V, 1-5 V, 0-10 V, external potentiometer
• Integrated varistor protection on output
• 2 Front LEDs indicate status of load and control
• 100 kA short circuit current rating according to UL508
• DIN Rail or panel mounting
相關連結
- Carlo Gavazzi RGC1P DIN Rail, Panel Power Controller AC 250V Analogue
- Carlo Gavazzi RGC1P Series Solid State Relay DIN Rail Mount 10V dc Control
- Carlo Gavazzi RGC1P Series Industrial Mount Solid State Relays DIN Rail Mount 10V dc Control
- Carlo Gavazzi RGC1P Series Industrial Mount Solid State Relays DIN Rail Mount 32V dc Control
- Carlo Gavazzi CLD2EB1BU24 Series Level Controller -, DIN Rail 2 Analogue Input 24 V-Rated Relay
- Carlo Gavazzi CLD1EA1CM24 Series Level Controller -, DIN Rail 1 Analogue Input 24 V-Rated Relay
- Carlo Gavazzi CLP Series Level Controller -, DIN Rail 2 Analogue Input 24 V-Rated Relay
- Carlo Gavazzi Controller
