Siemens RDE Wall Mount Thermostat 1 Input, 2 Output On-Off 3V dc Room Temperature Controller

RS庫存編號:: 245-175
製造零件編號:: RDE100.1 / S55770-T279
製造商:: Siemens

Siemens RDE Wall Mount Thermostat 1 Input, 2 Output On-Off 3V dc Room Temperature Controller

小計（1 件）*

TWD4,293.00

(不含稅)

TWD4,507.65

庫存資訊目前無法存取 - 請稍後再回來查看

單位	每單位
1 +	TWD4,293.00

* 參考價格

RS庫存編號:: 245-175
製造零件編號:: RDE100.1 / S55770-T279
製造商:: Siemens

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Siemens
	Product Type	Thermostat
	Output Type	On-Off
	Number of Inputs	1
	Number of Outputs	2
	Maximum Operating Temperature	+35°C
	Minimum Operating Temperature	+5°C
	Control Type	Room Temperature Controller
	Maximum Supply Voltage	3V dc
	Auxiliary Power Supply	230 V ac
	Maximum Voltage	230V ac
	Display Type	LCD
	Width	85mm
	Standards/Approvals	EAC, CE, UKCA
	Length	21.5mm
	IP Rating	IP30
	Series	RDE
	Mount Type	Wall Mount
	Input Type	External

	選取全部
	品牌 Siemens
	Product Type Thermostat
	Output Type On-Off
	Number of Inputs 1
	Number of Outputs 2
	Maximum Operating Temperature +35°C
	Minimum Operating Temperature +5°C
	Control Type Room Temperature Controller
	Maximum Supply Voltage 3V dc
	Auxiliary Power Supply 230 V ac
	Maximum Voltage 230V ac
	Display Type LCD
	Width 85mm
	Standards/Approvals EAC, CE, UKCA
	Length 21.5mm
	IP Rating IP30
	Series RDE
	Mount Type Wall Mount
	Input Type External

COO (Country of Origin):: CN

Siemens RDE Series Thermostat, 230V Maximum Voltage, Wall Mount Type - RDE100.1 / S55770-T279

This thermostat is a room temperature controller designed for wall mounting in commercial and industrial installations. It provides Basic on–off temperature regulation via an LCD, accepts an external sensor input, and operates from standard mains supply for straightforward integration into building automation and HVAC control schemes.

Features and Benefits:

• 230V AC supply supports direct connection to the mains
• Two independent on–off outputs enable separate circuit control
• Single external input permits remote sensor operation
• LCD offers clear status and setpoint visibility
• IP30 enclosure rating suitable for protected indoor environments

Applications

• Suitable for temperature control in plant rooms and boiler rooms
• Ideal for integration with electrical distribution and control panels
• Used with fan‑coil units requiring simple on–off switching
• Can be used for room‑level control in office and commercial spaces

What supply voltages can it tolerate during installation?

The unit is designed to be powered from 230V AC and has a maximum supply voltage rating that aligns with typical mains limits.

How does it Interface with external sensors?

It accepts a single external input enabling connection to a remote temperature sensor for more representative room measurements.

What outputs are available for controlling heating or equipment?

Two on–off outputs are provided so separate devices or stages can be switched independently.

What environmental conditions limit its placement?

Operational ambient temperature is constrained between +5°C and +35°C and the IP30 enclosure requires installation in non‑exposed indoor locations.

Which approvals ensure conformity for industrial use?

The device complies with recognised regional standards and carries relevant conformity markings for use in its intended markets.