透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Fluke calibration
	Resolution	0.1 °C
	Calibrator Type	Drywell Calibrator
	Product Type	Temperature Calibrator
	Accuracy	0.25 °C
	Thermocouple Type	RTD
	Temperature Scale	°C, F, Fahrenheit
	Power Source	Mains
	Minimum Thermocouple Temperature	0.25°C
	Length	150mm
	Width	125mm
	Weight	1.1kg
	Standards/Approvals	IEC 61010-1
	Height	57mm

	選取全部
	品牌 Fluke calibration
	Resolution 0.1 °C
	Calibrator Type Drywell Calibrator
	Product Type Temperature Calibrator
	Accuracy 0.25 °C
	Thermocouple Type RTD
	Temperature Scale °C, F, Fahrenheit
	Power Source Mains
	Minimum Thermocouple Temperature 0.25°C
	Length 150mm
	Width 125mm
	Weight 1.1kg
	Standards/Approvals IEC 61010-1
	Height 57mm

COO (Country of Origin):: US

FLUKE Temperature Calibrator, Drywell Type, +0.25°C Accuracy Rating - 9100 Series - 9100S/RS-A-256

Take charge of setting up your instrumentation devices with this temperature calibrator from FLUKE. You can use it to test and adjust the measurement range of your RTDs, thermocouples and bimetal thermometers. Simply plug it in, set the temperature range with its panel buttons and insert the probe of your device into its built-in pocket. This pocket comes with a heat source to warm the probe up, letting you clearly see if it's getting its thermal readings right.

• Integrated display screen for convenience

• Light weight of 1kg for easy portability

• Quick heating time to +375°C of 9.5 minutes and cooling time of 14 minutes for speedy operation

Applications

• Food and beverage production

• Laboratories

• Storage facilities

• Gas plants

What's the temperature setting range of this calibrator?

Thanks to a wide temperature setting range between -35°C and +375°C, you can use the unit to test equipment used in extreme industrial applications.

How accurate is the temperature calibrator?

This product has an accuracy rating of +0.25°C so you can reliably use it to reset your device with a minimal risk of errors.

Fluke 9100S Hand Held Temperature Drywell

A drywell heat source offering a combination of extreme portability and good performance to meet the requirements associated with high speed, high volume industrial calibrations in a shop floor environment. Use the instruments independently or together to make fast zero and span calibrations of temperature sensors.

Drywell for checking RTDs, thermocouples, and small bimetal thermometers in the field

Fast and easy calibrations of temperature sensors

Temperature range 35°C to 375°C, expandable to –10 °C to 375 °C when used with a 9102S drywell (see stock no 537-048)

Direct interface to the Fluke 744 Documenting Process Calibrator

Multiple sized sensor holes to accept a wide range of temperature sensor diameters

Fluke 9100 Series Drywell Heat Sources

Note

For 9100S carry case see stock no. 537-044

Supplied with

Power Cord, User's Guide with Report of Calibration, RS-232 Cable, 9930 Interface-it Software and User's Guide

Fluke calibration 9100S/RS-A-256 Temperature Calibrator

訂單超過 $1,300.00 免費送貨