Eaton 200A British Standard Fuse, B2, 415V, 111mm

Cooper Bussman's bolted tag fuse is essentially a fuse that is fitted with brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage measure. Cooper Bussman's fuses are commonly found within a multitude of industrial applications, electrical equipment and wiring systems.

• The low-temperature rise enables the fuse to be suitable for high-density mounting applications
• Fuse links, specifically designed for the protection of applications
• Conforms to industry standards
• Low voltage fuse
• Suitable for three-phase applications
• Suitable for type 2 co-ordinated applications as defined in IEC 947-4
• Low power loss, typically 20% lower than the requirements of BS88

A slotted tag fuse is distinguished by the metal slotted tags that extend off the ends of the fuse. This tag can either enable the fuse to have an offset tag or be centred to the fuse. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage protection measure within electrical circuits.

This low voltage British standard fuse provides essential protection for electrical circuits. It has a current rating of 200 A and meets BS 88 and IEC 269 standards. With dimensions of 136mm x 31mm, it is suited for various industrial applications where safety and efficiency are crucial.

• High rupture capacity enhances safety during faults
• Centre bolted tags allow secure connections
• Suitable for general industrial applications
• Compatible with RS200 Red spot fuse holder
• 80 kA breaking capacity protects circuitry from damage
• Categorised as gM for motor protection

• Protects machinery in manufacturing settings
• Ideal for circuits with high starting currents
• Suitable for equipment requiring consistent performance
• Commonly used in electrical installations within industrial environments

Yes, it is designed to manage surge currents due to its high rupture capacity.

Yes, it is compatible with the RS200 Red spot fuse holder.

Yes, it is classified under the gM category for motor safety.

It features a breaking capacity of 80 kA for safety.

Eaton formerly known as Bussmann