STMicroelectronics Buck Converter, Surface Mount, 38V Output Voltage, 2 A Output Current, 1 Outputs
- RS庫存編號:
- 225-0014P
- 製造零件編號:
- L6986ITR
- 製造商:
- STMicroelectronics
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計 10 件 (按連續帶提供)*
TWD982.00
(不含稅)
TWD1,031.10
(含稅)
庫存資訊目前無法存取 - 請稍後再回來查看
單位 | 每單位 |
|---|---|
| 10 - 95 | TWD98.20 |
| 100 - 245 | TWD95.60 |
| 250 - 495 | TWD93.40 |
| 500 + | TWD91.40 |
* 參考價格
- RS庫存編號:
- 225-0014P
- 製造零件編號:
- L6986ITR
- 製造商:
- STMicroelectronics
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | STMicroelectronics | |
| Output Voltage 1 | 38V | |
| Product Type | Buck Converter | |
| Output Current | 2A | |
| Mount Type | Surface Mount | |
| Number of Outputs | 1 | |
| Power | 5W | |
| Maximum Operating Temperature | 150°C | |
| Minimum Operating Temperature | -40°C | |
| Number of Pins | 16 | |
| Output Voltage 2 | 0.6V | |
| Series | L6986L | |
| Package Type | HTSSOP-16 | |
| Depth | 1.2mm | |
| Width | 6.6mm | |
| Length | 5.1mm | |
| Standards/Approvals | No | |
| Maximum Input Voltage | 38V | |
| Minimum Input Voltage | 4V | |
| 選取全部 | ||
|---|---|---|
品牌 STMicroelectronics | ||
Output Voltage 1 38V | ||
Product Type Buck Converter | ||
Output Current 2A | ||
Mount Type Surface Mount | ||
Number of Outputs 1 | ||
Power 5W | ||
Maximum Operating Temperature 150°C | ||
Minimum Operating Temperature -40°C | ||
Number of Pins 16 | ||
Output Voltage 2 0.6V | ||
Series L6986L | ||
Package Type HTSSOP-16 | ||
Depth 1.2mm | ||
Width 6.6mm | ||
Length 5.1mm | ||
Standards/Approvals No | ||
Maximum Input Voltage 38V | ||
Minimum Input Voltage 4V | ||
The STMicroelectronics 5 W synchronous iso-buck converter is a device specifically designed for the isolated buck topology. Due to the P-Channel MOSFET as high-side power switch the device features 100% duty cycle operation. The primary output voltage can be accurately adjusted, whereas the isolated secondary output is derived by using a given transformer ratio. No optocoupler is required. The primary sink capability up to 1.9 A (even during softstart) allows a proper energy transfer to the secondary side as well as enables a tracked soft-start of the secondary output.
Designed for iso-buck topology
4 V to 38 V operating input voltage
Primary output voltage regulation / no optocoupler required
1.9 A typical sink Peak primary current capability
Peak current mode architecture in forced PWM operation
300 ns blanking time