Recom Switching Regulator, Through Hole, 3.3V dc Output Voltage 32V dc, 2 A Output Current, 1 Outputs

此圖片僅供參考,請參閲產品詳細資訊及規格

可享批量折扣
查看批量定價選項

小計(1 管,共 42 件)*

TWD16,977.00

(不含稅)

TWD17,825.85

(含稅)

Add to Basket
選擇或輸入數量
暫時缺貨
  • 1 件從 2026年8月27日 起裝運發貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

每管
每單位*
1 - 1TWD16,977.00TWD404.214
2 - 3TWD16,637.00TWD396.119
4 +TWD16,304.00TWD388.19

* 參考價格

RS庫存編號:
139-2820
製造零件編號:
R-78B3.3-2.0
製造商:
Recom
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Recom

Product Type

Switching Regulator

Output Voltage 1

3.3V dc

Output Current

2A

Mount Type

Through Hole

Number of Outputs

1

Power

6.6W

Efficiency

0.92%

Ripple and Noise

50mV Pk-Pk

Maximum Operating Temperature

70°C

Minimum Operating Temperature

-40°C

Series

R-78B-2.0

Number of Pins

3

Line Regulation

±0.5 %

Package Type

SIP-3

Depth

8.5mm

Length

11.5mm

Standards/Approvals

EN 55022, IEC/EN 62368-1, CB Report

Width

8.5mm

Weight

4g

Maximum Input Voltage

32V dc

Minimum Input Voltage

4.75V

Load Regulation

±1 %

MTBF

6349000h

COO (Country of Origin):
TW

RECOM Switching Regulator, 92% Maximum Efficiency, 50mV Ripple Voltage - R-78B-2.0 Series - R-78B3.3-2.0


Got a supply voltage and attached components that don't see eye to eye? Put this switching regulator from RECOM in the middle to give your equipment the power it needs. By adapting input voltages between 4.75 and 32V DC to a steady 3.3V DC output, it brings supplies into line and makes them widely compatible. With a 92% maximum efficiency rating, the unit cuts out waste power during conversion to keep your system working efficiently. The regulator doesn't hang around – it starts up in just 10ms so you can GET to work.

• Built-in overtemperature and short-circuit protection to protect your system against faults

• Line regulation rating of ±0.5%, so its output voltage stays stable

• Ripple voltage of 50mV to minimise disruption from electrical noise

• Wide operating temperature range between -40°C and +70°C for use in tough industrial environments

Applications


• Digital cameras

• Office and school buildings

• Building surveyance

How do I install this switching regulator?


You can install this unit on your PCB using through-hole mounting. Simply insert the built-in pins into pre-drilled holes on your board and solder them to the underside.

R78Bxx 2.0 Series Switching Regulator


The Recom R-78Bxx series are highly efficient, non-isolated switching regulators. They offer a high-quality product at a low cost in production quantity. They are ideally suited to replace 78xx linear regulators, as well as being pin compatible.

The convertor has a high-voltage input range and there is no need for heat sinks, due to little energy being wasted. It has a wide input range with continuous short circuit protection and no external components are needed to work efficiently.

Features and Benefits


• Wide operating temperature of -40 to +70 °C at full load

• Pin compatible with TO220 linear regulators

• High efficiency, non-isolated, no need for heatsinks

• Requires no external components

• Continuous short circuit protection

• Low ripple and noise

• Compact size, ensuring space saving

• Positive to negative converter

相關連結

第一時間了解我們的最新產品和優惠

電郵

您在訂閱此郵件時提供的個人信息將根據《隱私政策》進行處理。