Tedea Huntleigh Model 1042 Series S Type Load Cell, 1 kg, Compression Measure, 3 kg
- RS庫存編號:
- 443-8128
- 製造零件編號:
- 1042-0003-F000-RS
- 製造商:
- Tedea Huntleigh
小計（1 件）*
TWD3,985.00
(不含稅)
TWD4,184.25
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 17 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD3,985.00 |
* 參考價格
- RS庫存編號:
- 443-8128
- 製造零件編號:
- 1042-0003-F000-RS
- 製造商:
- Tedea Huntleigh
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Tedea Huntleigh | |
| Force Measured | Compression | |
| Product Type | Load Cell | |
| Series | Model 1042 | |
| Sensor Type | S Type | |
| Terminal Type | Wire | |
| Mount Type | Hole | |
| IP Rating | IP66 | |
| Maximum DC Voltage | 15V dc | |
| Maximum AC Voltage | 15V ac | |
| Housing Material | Aluminium | |
| Width | 150mm | |
| Minimum Operating Temperature | -10°C | |
| Maximum Force/Load Measurement | 3kg | |
| Minimum Force/Load Measurement | 1kg | |
| Maximum Operating Temperature | 40°C | |
| Length | 40mm | |
| Depth | 20mm | |
| Standards/Approvals | OIML, NTEP | |
| 選取全部 | ||
|---|---|---|
品牌 Tedea Huntleigh | ||
Force Measured Compression | ||
Product Type Load Cell | ||
Series Model 1042 | ||
Sensor Type S Type | ||
Terminal Type Wire | ||
Mount Type Hole | ||
IP Rating IP66 | ||
Maximum DC Voltage 15V dc | ||
Maximum AC Voltage 15V ac | ||
Housing Material Aluminium | ||
Width 150mm | ||
Minimum Operating Temperature -10°C | ||
Maximum Force/Load Measurement 3kg | ||
Minimum Force/Load Measurement 1kg | ||
Maximum Operating Temperature 40°C | ||
Length 40mm | ||
Depth 20mm | ||
Standards/Approvals OIML, NTEP | ||
豁免
Low Profile Aluminium
Compensated Temperature Range -10 to +40°C
Output Impedance 350 +/- 3Ω
Termination Type: Cable
Ultimate Overload: 300% of Rated Load
1042 series low profile single point load cell designed for direct mounting of low cost weighing platforms. Has a humidity resistant protective coating, which assures long term stability over the entire compensated temperature range.
Dimensions: 20 x 40 x 150mm (1 to 30kg); 25.2 x 40 x 150mm (50 to 100kg)
Please also browse our range of output signal conditioners
相關連結
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure, 7 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure, 30 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure, 5 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure 415Ω
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure 415Ω
- Tedea Huntleigh Model 1042 Series Low Profile Load Cell Compression Measure, 200 kg
- Tedea Huntleigh Model 1042 Series Low Profile Load Cell Compression Measure, 50 kg
- Tedea Huntleigh Model 1042 Series Low Profile Load Cell Compression Measure, 30 kg