Festo EMMT Series Hybrid Stepper Motor 48V, 0.63Nm Torque, 1.8 °, 42 mm Frame, 5 mm Shaft

RS庫存編號:: 827-242
製造零件編號:: EMMT-ST-42-L-RSB
製造商:: Festo

Festo EMMT Series Hybrid Stepper Motor 48V, 0.63Nm Torque, 1.8 °, 42 mm Frame, 5 mm Shaft

小計（1 件）*

TWD16,658.00

(不含稅)

TWD17,490.90

訂單超過 $1,300.00 免費送貨

製造商存貨

準備從 2026年11月23日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD16,658.00

* 參考價格

RS庫存編號:: 827-242
製造零件編號:: EMMT-ST-42-L-RSB
製造商:: Festo

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Festo
	Sub Type	Hybrid
	Product Type	Stepper Motor
	Step Angle	1.8°
	Holding Torque	0.63Nm
	Voltage	48V
	Mount Type	Any Position
	Frame Size	42 mm
	Shaft Diameter	5mm
	Current Rating	3.4A
	Winding Arrangement	Bipolar
	IP Rating	IP65
	Shaft Length	24mm
	Number of Pole Pairs	50
	Standards/Approvals	CE, cULus, IEC 60034, RCM, RoHS, UL E342973
	Length	112mm
	Width	42mm
	Depth	42mm
	Resistance Per Phase	0.6Ω
	Output Speed	1000rpm
	Series	EMMT
	Detent Torque	0.63nm

	選取全部
	品牌 Festo
	Sub Type Hybrid
	Product Type Stepper Motor
	Step Angle 1.8°
	Holding Torque 0.63Nm
	Voltage 48V
	Mount Type Any Position
	Frame Size 42 mm
	Shaft Diameter 5mm
	Current Rating 3.4A
	Winding Arrangement Bipolar
	IP Rating IP65
	Shaft Length 24mm
	Number of Pole Pairs 50
	Standards/Approvals CE, cULus, IEC 60034, RCM, RoHS, UL E342973
	Length 112mm
	Width 42mm
	Depth 42mm
	Resistance Per Phase 0.6Ω
	Output Speed 1000rpm
	Series EMMT
	Detent Torque 0.63nm

COO (Country of Origin):: BG

Festo EMMT-ST Series Stepper Motor, 0.63Nm Holding Torque, 48V Nominal Operating Voltage - EMMT-ST-42-L-RSB, Numeric Part Number: 8156171

This stepper motor is a Compact industrial servo‑subtype actuator designed for precise position control in automation systems. It operates from a 48V supply and provides a 1.8° step angle for incremental motion tasks. The unit incorporates an absolute single‑turn rotor position encoder with BiSS‑C Interface for accurate feedback and can be mounted in any orientation. It is intended for use in environments requiring moderate ingress protection and vibration and shock resilience.

Features and Benefits:

• 0.63Nm holding torque delivers secure load retention during stops
• 1.8° step angle enables accurate incremental positioning
• 3.4A nominal current supports sustained torque output
• 3200rpm max output speed allows high‑speed indexing
• IP65 housing protection resists water ingress at enclosure level

Applications

• Suitable for pick‑and‑place automation with position feedback
• Ideal for rotary indexing tables in assembly lines
• Used with motion controllers for conveyor synchronisation
• Can be used for laboratory automation requiring precise steps
• Suitable for transport‑grade equipment exposed to vibration

What encoder resolution is available for position measurement?

The absolute encoder provides 16‑bit resolution with 65,536 position values per revolution and magnetic sensing.

How does the brake operate electrically and mechanically?

The integral holding brake runs at 24V DC, consumes 0.34A, closes within ≤41ms and releases within ≤28ms.

What thermal and ambient limits apply to continuous operation?

Rated for ambient -15°C…40°C with storage -20°C…70°C, and windings maximum temperature 130°C

derating applies above 40°C at -2%/°C.

What are the electrical winding characteristics relevant to drive design?

Phase resistance is 0.6Ω, phase inductance 0.8mH, voltage constant 10.6mVmin and motor constant 0.162Nm/A.

What mechanical load capacities should be observed on the shaft?

Permissible axial shaft load is 10N and radial shaft load is 28N for reliable operation.