Wurth Elektronik M2.5 Spacer Stud, 10 mm Body, 6 mm Stud, Brass

This spacer stud is a hex-shaped brass fastener supplied with a nickel surface treatment for use in electronic assemblies. It functions as a threaded male/female standoff to separate and secure circuit assemblies where insulated spacing and mechanical connection are required. The component conforms to multiple industry material and safety standards and is specified for Compact installations.

• Hexagonal form enables secure spanner engagement
• M2.5 threading provides fine-pitch fastening control
• Male/female configuration allows reversible mounting options
• Nickel surface reduces surface oxidation in assemblies
• 5mm hole depth permits reliable screw engagement

• Suitable for securing stacked circuit boards in Compact enclosures
• Used with metal-to-PCB mounting arrangements requiring isolation
• Ideal for mounting daughterboards where space is limited
• Can be used for mechanical support in electronic modules
• Suitable for repair and prototyping of small consumer electronics

The primary material is brass, which offers good electrical conductivity and mechanical strength.

The across-flats measurement is 5mm to match standard hex spanners.

The internal receiving depth is 5mm, limiting screw insertion accordingly.

Both male and female threaded interfaces use the M2.5 specification.

The overall part length is 10mm while the protruding stud measures 6mm.