INA 20 Tooth Parallel Sprocket, KSR16-L0-12-10-20-15
- RS庫存編號:
- 194-7232
- 製造零件編號:
- KSR16-L0-12-10-20-15
- 製造商:
- INA
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 件）*
TWD2,660.00
(不含稅)
TWD2,793.00
(含稅)
庫存資訊目前無法存取 - 請稍後再回來查看
單位 | 每單位 |
|---|---|
| 1 - 4 | TWD2,660.00 |
| 5 - 9 | TWD2,553.00 |
| 10 - 24 | TWD2,500.00 |
| 25 + | TWD2,448.00 |
* 參考價格
- RS庫存編號:
- 194-7232
- 製造零件編號:
- KSR16-L0-12-10-20-15
- 製造商:
- INA
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | INA | |
| Number of Teeth | 20 | |
| Product Type | Sprocket | |
| Bore Type | Parallel | |
| Pitch Diameter | 19.05mm | |
| Material | Steel | |
| Sprocket Width | 18.3mm | |
| Maximum Inside Diameter | 16.2mm | |
| Standards/Approvals | No | |
| 選取全部 | ||
|---|---|---|
品牌 INA | ||
Number of Teeth 20 | ||
Product Type Sprocket | ||
Bore Type Parallel | ||
Pitch Diameter 19.05mm | ||
Material Steel | ||
Sprocket Width 18.3mm | ||
Maximum Inside Diameter 16.2mm | ||
Standards/Approvals No | ||
INA roller chain idler sprocket units are guidance and return units for roller bush chains and roller chains. They can compensate for chain stretch resulting from operation and give smoother system running under high loads and speeds
The ready-to-fit units comprise sprockets and deep groove ball bearings or radial insert ball bearings. The sprockets are made from high strength steel, sintered iron or plastic (polyamide). Sprockets made from plastic give particularly smooth running and generate very little noise. Since the inner ring of the deep groove ball bearing is extended on both sides, no additional spacer rings are required
In series KSR..-B0, the inner ring is located on the shaft by means of a locking collar. The bearing bore of this series has a plus tolerance.
相關連結
- INA 20 Tooth Parallel Sprocket, KSR16-L0-06-10-20-08
- INA 16 Tooth Parallel Sprocket, KSR16-L0-08-10-16-15
- INA 17 Tooth Parallel Sprocket, KSR16-L0-12-10-17-15
- INA 18 Tooth Parallel Sprocket, KSR16-L0-08-10-18-08
- INA 13 Tooth Parallel Sprocket, KSR16-L0-12-10-13-08
- INA 17 Tooth Parallel Sprocket, KSR16-L0-10-10-17-08
- INA 16 Tooth Parallel Sprocket, KSR16-L0-08-10-16-08
- INA 14 Tooth Parallel Sprocket, KSR16-L0-10-10-14-08