可享批量折扣
小計（1 組）*
TWD1,231.00
(不含稅)
TWD1,292.55
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 20 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
組 | 每組 |
|---|---|
| 1 - 4 | TWD1,231.00 |
| 5 + | TWD1,014.00 |
* 參考價格
- RS庫存編號:
- 499-267
- 製造商:
- RS PRO
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | RS PRO | |
| Product Type | Drill Bit | |
| Drill Diameter | 5 to 20 mm | |
| Number of Pieces | 1 | |
| Material | HSS | |
| Minimum Head Size | 5mm | |
| Maximum Head Size | 20mm | |
| Standards/Approvals | No | |
| 選取全部 | ||
|---|---|---|
品牌 RS PRO | ||
Product Type Drill Bit | ||
Drill Diameter 5 to 20 mm | ||
Number of Pieces 1 | ||
Material HSS | ||
Minimum Head Size 5mm | ||
Maximum Head Size 20mm | ||
Standards/Approvals No | ||
豁免
Sheet metal hole cutter, spiral tap, blank
HSS hole cutter with spiral tap
For burr-free drilling and planing pipes, sheet metals and profiles, as well as moulding, retro drilling and expanding cut-outs
Suitable for construction steel, stainless steel, non-ferrous metals, Plexiglas, plastic and wood up to 6 mm thick
Crosswise grinding means no centre-punching necessary, drill bits do not run
Diameter guide lasered into the tap, legible even when rotating
Three-faced driving shaft, prevents slipping in the drill chuck
Warning
Not suitable for aluminium. Use without cooling agents.
Supplied with
Set, stock no. 499-261 contains 1 x 4 → 20 mm hole cutter and 1 x 5 → 31 mm