Infineon 5-Pin Microphone, Omni-Directional, Surface, Digital Output, PG-LLGA-5 1.62 V 3.6V
- RS庫存編號:
- 234-4636
- 製造零件編號:
- IM67D120AXTSA1
- 製造商:
- Infineon
可享批量折扣
查看批量定價選項小計（1 包，共 2 件）*
TWD173.00
(不含稅)
TWD181.64
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 702 件從 2026年8月24日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 2 - 8 | TWD86.50 | TWD173.00 |
| 10 - 98 | TWD85.50 | TWD171.00 |
| 100 - 248 | TWD83.50 | TWD167.00 |
| 250 - 498 | TWD81.50 | TWD163.00 |
| 500 + | TWD76.00 | TWD152.00 |
* 參考價格
- RS庫存編號:
- 234-4636
- 製造零件編號:
- IM67D120AXTSA1
- 製造商:
- Infineon
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Infineon | |
| Product Type | Microphone | |
| Technology | MEMS Microphone | |
| Output Type | Digital | |
| Frequency Range | 2.9 to 3.3 MHz | |
| Directivity | Omni-Directional | |
| Sensitivity | 1kHz | |
| Signal to Noise Ratio | 67dB | |
| Minimum Supply Voltage | 1.62V | |
| Mount Type | Surface | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Operating Temperature | -40°C | |
| Package Type | PG-LLGA-5 | |
| Maximum Operating Temperature | 150°C | |
| Length | 4mm | |
| Standards/Approvals | No | |
| Height | 1.5mm | |
| Pin Count | 5 | |
| Port Location | Bottom | |
| Automotive Standard | AEC-Q103 | |
| 選取全部 | ||
|---|---|---|
品牌 Infineon | ||
Product Type Microphone | ||
Technology MEMS Microphone | ||
Output Type Digital | ||
Frequency Range 2.9 to 3.3 MHz | ||
Directivity Omni-Directional | ||
Sensitivity 1kHz | ||
Signal to Noise Ratio 67dB | ||
Minimum Supply Voltage 1.62V | ||
Mount Type Surface | ||
Maximum Supply Voltage 3.6V | ||
Minimum Operating Temperature -40°C | ||
Package Type PG-LLGA-5 | ||
Maximum Operating Temperature 150°C | ||
Length 4mm | ||
Standards/Approvals No | ||
Height 1.5mm | ||
Pin Count 5 | ||
Port Location Bottom | ||
Automotive Standard AEC-Q103 | ||
The Infineon high performance digital MEMS microphone is designed for applications where low self-noise, wide dynamic range, low distortions and a high acoustic overload point is required. The digital microphone contains an extremely low-noise preamplifier and a high-performance sigma-delta ADC. Different power modes can be selected in order to suit specific current consumption requirements.
Dynamic range of 93dB for best speech performance
Signal to noise ratio of 67dB
<1% total harmonic distortions up to high SPL levels
Acoustic overload point at 120dBSPL
Increased sensitivity for best performance with 16-bit CODECs
Automotive qualification
Close sensitivity and phase matching for use in arrays
Flat frequency response with low frequency roll off and very fast analog to digital conversion speed for best ANC performance
Digital PDM output
Extended availability to match automotive design cycles
相關連結
- Infineon 5-Pin Microphone Surface PG-LLGA-5 1.62 V 3.6 V
- Infineon 5-Pin Microphone Surface LLGA 3.6 V 3.6 V
- Infineon 5-Pin Microphone PCB LLGA 3.6 V 3.6V
- Infineon 5-Pin Microphone Analogue Output, PG-LLGA-5 1.52 V 3 V
- Infineon 5-Pin Microphone Surface LGA 1.62 V 3.6 V
- Infineon 5-Pin Microphone Surface PG-TLGA-5-6 3.6 V 3.6 V
- Infineon 5-Pin Sound Sensor Surface PG-TLGA-5-6 1.62 V 3.6 V
- Infineon 5-Pin Sound Sensor Surface LLGA 1.8 V 3.6 V