Phoenix Contact DEK-OE-5DC/24DC/100KHZ Series Solid State Relay, DIN Rail Mount, 300 V Load, 300V Control

查看所有Solid State Relays

小計（1 件）*

TWD3,798.00

(不含稅)

TWD3,987.90

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 53 件準備發貨
  • 加上 49 件準備從其他倉庫發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 +TWD3,798.00

* 參考價格

RS庫存編號:
533-0003
Distrelec 貨號:
304-01-212
製造零件編號:
2964270
製造商:
Phoenix Contact
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Phoenix Contact

Product Type

Solid State Relay

Mount Type

DIN Rail

Maximum Load Voltage

300V

Maximum Control Voltage

300V

Series

DEK-OE-5DC/24DC/100KHZ

Terminal Type

Screw

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

60°C

Length

80mm

Width

6.2 mm

Standards/Approvals

RoHS

Height

56mm

COO (Country of Origin):
CN

Phoenix Contact Solid State Relay Optocoupler, 2500V Isolation Voltage, 5V Maximum Forward Voltage - DEK-OE- 5DC/ 24DC/100KHZ - 2964270


Ensure quick switching between the 'on' and 'off' states of your electrical device using this optocoupler from Phoenix Contact. It keeps the input and output circuits isolated while acting as a safe link to transmit current without interference. The circuits remain apart even under extreme voltages as high as 2500V, so the unit is suitable for high-powered applications.

For additional safety and to limit potential damage, the input circuits have a reverse polarity diode which cuts off power if they're connected incorrectly. You'll find it easy to monitor the optocoupler's performance, thanks to the yellow LED (light-emitting diode) signal. With a large output voltage range between 4 and 30V DC and a wide operating temperature range between -20°C and +60°C, you can use it reliably in demanding industrial situations. Standard DIN rail mounting lets you install it quickly on a panel without complex tools.

• Light weight of 21.46g so adds minimal strain on your panel

• Suppressor diode protects output circuits from electrical surges

Phoenix Contact Opto-Couplers with Solid State Relay Output


These DIN rail mount opto-couplers from Phoenix Contact provide an ideal means of interfacing on/off signals to, or from, equipment, whilst providing electrical isolation between their own inputs and outputs. In other words, these may be used to protect equipment by electrically isolating its inputs, outputs, or both. The dc/ac and ac/dc versions also provide a means of interfacing (whilst isolating) ac and dc control voltages.

Features and Benefits


• Dc in/Dc out, Dc in/Ac out and Ac in/Dc out versions available

• Versions with switching speeds up to 100kHz available

• 2.5kVac input to output isolation

• LED status indication

• Module width 6.2mm

• Operating temperature range: -20 to +60°C

Standards

IEC 60 664, IEC 60 664A, DIN VDE 0110

相關連結