Omron G3DZ Series Solid State Relay, 0.6 A Load, PCB Mount, 264 V ac Load, 5 V dc Control
- RS庫存編號:
- 365-0620
- 製造零件編號:
- G3DZ-2R6PL DC5
- 製造商:
- Omron
單價 個**
原價 TWD1,305.00
您付款
TWD885.00
(不含稅)
TWD929.25
(含稅)
36 現貨庫存，可於6工作日發貨。*
* 交貨日期可能會根據您選擇的數量和交貨地址而變更。
訂單金額滿 TWD2,857.00 (未稅) 即可享受 免費 送貨服務
單位 | 每單位 |
|---|---|
| 1 + | TWD885.00 |
** 參考價格
- RS庫存編號:
- 365-0620
- 製造零件編號:
- G3DZ-2R6PL DC5
- 製造商:
- Omron
G3DZ SSR
These PCB mount MOSFET power relays have a maximum switching current of 0.6A and are suitable for switching full and half wave alternating currents.
SSR identical in size to the G6D series (stk no 512-9320 etc) with a max. ac/dc switching current of 0.6A
Suitable for switching full and half-wave alternating current
10μA maximum output leakage current
Output ON resistance: 2.4Ω
2500Vac dielectric strength between input and output
Input resistor and varistor incorporated
Single Phase connection line to neutral
See stk no 376-717 for a suitable PCB socket
Operating temperature range -30 to +85°C
Suitable for switching full and half-wave alternating current
10μA maximum output leakage current
Output ON resistance: 2.4Ω
2500Vac dielectric strength between input and output
Input resistor and varistor incorporated
Single Phase connection line to neutral
See stk no 376-717 for a suitable PCB socket
Operating temperature range -30 to +85°C
Omron G3DZ-2R6PL-DC5 MOFSET PCB Mount Power Solid State Relay.
The G3DZ solid State relay is the same size as the G6D with a 0.6 A maximum AC/DC current.
• Switching 0.6 A at 240 V ac or 100 V dc.
• 10μA maximum current leakage (between open terminals).
• With an input resistor
• Overvoltage absorption circuit (AC/DC models only).
• Full and half wave rectified. AC current switchable.
• PCB Mount
• MOSFET
• With input resistance.
• Standard models available with UL and CSA certification.
• RoHS Compliant.
• 10μA maximum current leakage (between open terminals).
• With an input resistor
• Overvoltage absorption circuit (AC/DC models only).
• Full and half wave rectified. AC current switchable.
• PCB Mount
• MOSFET
• With input resistance.
• Standard models available with UL and CSA certification.
• RoHS Compliant.
Features and Benefits of the MOSFET PCB Mount Solid State Relay.
• Isolation Photo-voltage coupler.
• No zero cross function.
• No indicators.
• Rated output load 0.6 A, 5 to 240 v ac, 5 to 100 V dc.
• Rated input voltage 5 V dc
• Operating voltage 4 to 6 V dc
• Must release voltage 1 V dc min.
• Impedance 830 Ω +20%
• Must operate voltage 4 V dc maximum.
• Rated load voltage 5 to 240 V ac, 5 to 100 V dc.
• Load voltage range 3 to 264 V ac, 3 to 125 V dc.
• Load current AC = 100 μ to 0.6 A, DC = 10 μ to 0.6 A.
• Inrush current 6 A (10 ms).
• No zero cross function.
• No indicators.
• Rated output load 0.6 A, 5 to 240 v ac, 5 to 100 V dc.
• Rated input voltage 5 V dc
• Operating voltage 4 to 6 V dc
• Must release voltage 1 V dc min.
• Impedance 830 Ω +20%
• Must operate voltage 4 V dc maximum.
• Rated load voltage 5 to 240 V ac, 5 to 100 V dc.
• Load voltage range 3 to 264 V ac, 3 to 125 V dc.
• Load current AC = 100 μ to 0.6 A, DC = 10 μ to 0.6 A.
• Inrush current 6 A (10 ms).
G3DZ-2R6PL-DC5 MOFSET PCB Mount Solid State Relay Added Features.
• Operate time 6 ms max.
• Release time 10 ms max.
• Output ON-resistance 2.4 Ω max.
• OFF State leakage 10 μ max (125 V dc), 100 μ max (200 V ac).
• Vibration resistance 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude).
• Shock resistance 1000 m/s².
• Weight 3.1 g approx.
• Release time 10 ms max.
• Output ON-resistance 2.4 Ω max.
• OFF State leakage 10 μ max (125 V dc), 100 μ max (200 V ac).
• Vibration resistance 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude).
• Shock resistance 1000 m/s².
• Weight 3.1 g approx.
Safety Notes.
• Do not clean or solder the PCB when the Solid State Relay is in the socket.
• Reverse surge voltage – If this is put on the input terminals insert a diode parallel to the input terminal. DO NOT impose a reversed voltage of more than 3 V.
• Terminal material has a high heat induction so any automatic or manual soldering should be achieved with 10 seconds at 260°C.
• Always when fitting a socket ensure it is matched correctly and insert pushing vertically (pressure straight down).
• Reverse surge voltage – If this is put on the input terminals insert a diode parallel to the input terminal. DO NOT impose a reversed voltage of more than 3 V.
• Terminal material has a high heat induction so any automatic or manual soldering should be achieved with 10 seconds at 260°C.
• Always when fitting a socket ensure it is matched correctly and insert pushing vertically (pressure straight down).
Suitable Isolation Socket.
• Part number P6D-04P. Stock number 376717.
屬性 | 值 |
|---|---|
| Maximum Load Current | 0.6 A |
| Mounting Type | PCB Mount |
| Maximum Load Voltage | 264 V ac |
| Minimum Load Voltage | 20 V dc |
| Maximum Control Voltage | 5 V dc |
| Control Voltage Range | 4 → 6 V dc |
| Minimum Load Current | 100 μA |
| Terminal Type | Through Hole |
| Contact Configuration | SPST |
| Output Device | MOSFET |
| Load Voltage Range | 3 → 125 V dc, 3 → 264 V ac |
| Maximum Turn On Time | 6 ms |
| Series | G3DZ |
| Dimensions | 18.5 x 6.5 x 12.5mm |
| Height | 12.5mm |
| Maximum Operating Temperature | +85°C |
| Minimum Operating Temperature | -30°C |
| Operating Temperature Range | -30 → +85°C |
| Length | 18.5mm |
| Depth | 6.5mm |
| Off State Leakage Current | 10 μA |