Broadcom ASSR-5211 Series Solid State Relay, 0.4 A Load, Surface Mount, 600 V Load, 0.8 V Control

RS庫存編號:: 189-4790
製造零件編號:: ASSR-5211-001E
製造商:: Broadcom

Broadcom ASSR-5211 Series Solid State Relay, 0.4 A Load, Surface Mount, 600 V Load, 0.8 V Control

此圖片僅供參考，請參閲產品詳細資訊及規格

可享批量折扣

小計（1 管，共 50 件）*

TWD6,080.00

(不含稅)

TWD6,384.00

訂單超過 $1,300.00 免費送貨

暫時缺貨

900 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位	每管*
50 - 50	TWD121.60	TWD6,080.00
100 - 200	TWD118.50	TWD5,925.00
250 - 450	TWD115.60	TWD5,780.00
500 - 950	TWD113.20	TWD5,660.00
1000 +	TWD111.00	TWD5,550.00

* 參考價格

RS庫存編號:: 189-4790
製造零件編號:: ASSR-5211-001E
製造商:: Broadcom

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Broadcom
	Maximum Load Current	0.4 A
	Mounting Type	Surface Mount
	Maximum Load Voltage	600 V
	Minimum Load Voltage	600 V
	Maximum Control Voltage	0.8 V
	Switching Type	AC/DC, DC Only
	Contact Configuration	SPST
	Terminal Type	6 Pin
	Output Device	MOSFET
	Package Style	DIP
	Load Voltage Range	-600 → +600V
	Maximum Turn On Time	5ms
	Series	ASSR-5211
	Dimensions	9.9 x 6.6 x 3.68mm
	Operating Temperature Range	-40 → +85°C
	Special Features	High-Speed Photovoltaic Diode Array
	Depth	6.6mm
	Maximum Operating Temperature	+85°C
	Length	9.9mm
	Off State Leakage Current	1 μA
	Minimum Operating Temperature	-40°C
	Capacitance	0.8pF
	Height	3.7mm

	選取全部
	品牌 Broadcom
	Maximum Load Current 0.4 A
	Mounting Type Surface Mount
	Maximum Load Voltage 600 V
	Minimum Load Voltage 600 V
	Maximum Control Voltage 0.8 V
	Switching Type AC/DC, DC Only
	Contact Configuration SPST
	Terminal Type 6 Pin
	Output Device MOSFET
	Package Style DIP
	Load Voltage Range -600 → +600V
	Maximum Turn On Time 5ms
	Series ASSR-5211
	Dimensions 9.9 x 6.6 x 3.68mm
	Operating Temperature Range -40 → +85°C
	Special Features High-Speed Photovoltaic Diode Array
	Depth 6.6mm
	Maximum Operating Temperature +85°C
	Length 9.9mm
	Off State Leakage Current 1 μA
	Minimum Operating Temperature -40°C
	Capacitance 0.8pF
	Height 3.7mm

ASSR-5211 High Current, 1 Form A, Solid State Relay (MOSFET) Data Sheet

High Current, 1 Form A, Solid State Relay (MOSFET) (600V/0.2A/16Ω)

The ASSR-5211 Solid State Relay (SSR) is specifically designed for high current applications, commonly found in the industrial equipments.The relay is a solid-state replacement for single-pole, normally-open, (1 Form A) electromechanical relays.

The ASSR-5211 consists of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled to a high-voltage output detector circuit. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage MOSFETs. The relay turns on (contact closes) with a minimum input current of 3mA through the input LED. The relay turns off (contact opens) with an input voltage of 0.8V or less.

The ASSR-5211 connection A, as shown in the schematic, allows the relay to switch either ac or dc loads. The connection B, with its advantages of reduced on-resistance and higher output current, allows the relays to switch dc loads only.

The electrical and switching characteristics are specified over the temperature range of -40°C to +85°C.

ASSR-5211, High Current, 1 Form A, Solid State Relay (MOSFET), 600V/0.2A/16Ohm)

Features

Compact Solid-State Bi-directional Signal Switch

Single Channel Normally-off

Single-Pole-Single-Throw (SPST) Relay

600V Output Withstand Voltage

0.2A or 0.4A Current Rating

Low On-Resistance: 4Ω Typical for DC-only, 16Ω Typical for AC/DC

High Speed Switching: 0.7ms (Ton), 0.07ms (Toff) Typical

High Transient Immunity: >1kV/μs

High Input-to-Output Insulation Voltage (Safety and Regulatory Approvals)

3750 Vrms for 1 min per UL1577

CSA Component Acceptance

Applications

Industrial Controls

Factory Automation

Data Acquisition

Measuring Instrument

Medical System

Security System

EMR / Reed Relay Replacement

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.

Optocouplers, Avago Technologies