MikroElektronika MIKROE-2038 DAC 3 Click Add On Board Signal Conversion Development Kit
- RS庫存編號:
- 923-5983
- 製造零件編號:
- MIKROE-2038
- 製造商:
- MikroElektronika
可享批量折扣
小計（1 件）*
TWD725.00
(不含稅)
TWD761.25
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 2 件從 2025年12月15日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 4 | TWD725.00 |
| 5 + | TWD711.00 |
* 參考價格
- RS庫存編號:
- 923-5983
- 製造零件編號:
- MIKROE-2038
- 製造商:
- MikroElektronika
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | MikroElektronika | |
| Featured Device | MCP4726 | |
| Kit Classification | Add On Board | |
| Resolution | 12-bit | |
| For Use With | MikroBUS | |
| Kit Name | DAC 3 Click | |
| Converter Type | DAC | |
| 選取全部 | ||
|---|---|---|
品牌 MikroElektronika | ||
Featured Device MCP4726 | ||
Kit Classification Add On Board | ||
Resolution 12-bit | ||
For Use With MikroBUS | ||
Kit Name DAC 3 Click | ||
Converter Type DAC | ||
- COO (Country of Origin):
- RS
DAC 3 click mikroBUS™
The Click accessory modules plug into the mikroBUS sockets in MikroElektronika microcontroller development boards. The DAC3 click add-on board has an on-board MCP4726 IC from Microchip and operates on a 3.3 V or 5 V power supply. The DAC3 click board communicates with the target board MCU through the mikroBUS™ I2C interface (SCL, SDA pins). Applications include motor control, sensor calibration, set point, offset trimming and PC peripherals.
12-bit DAC: MCP4726
Voltage output screw terminals
MCP4726: Integrated EEPROM for storing DAC register and configuration
I2C modes available: Standard (100 kHz), fast (400 kHz) and high-speed (3.4 MHz)
Selectable VREF
Supported in all MikroElektronika compilers
mikroBUS™ is a specially designed pinout standard with SPI, I2C, Analogue, UART, Interrupt, PWM, Reset and power supply pins
Voltage output screw terminals
MCP4726: Integrated EEPROM for storing DAC register and configuration
I2C modes available: Standard (100 kHz), fast (400 kHz) and high-speed (3.4 MHz)
Selectable VREF
Supported in all MikroElektronika compilers
mikroBUS™ is a specially designed pinout standard with SPI, I2C, Analogue, UART, Interrupt, PWM, Reset and power supply pins
Note
Click board comes with the header strips soldered.