ifm electronic SmartL25 4DI C Series I/O Module, 4 Port, Bus System AS Interface

查看所有Sensor Connectivity

小計（1 件）*

TWD5,179.00

(不含稅)

TWD5,437.95

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 1 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 +TWD5,179.00

* 參考價格

RS庫存編號:
739-6755
製造零件編號:
AC2250
製造商:
ifm electronic
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

ifm electronic

Product Type

I/O Module

Inlet Connection Type

Combicon Plug With Screw Terminals

Number of Ports

4

Maximum Operating Voltage

31.6V

Series

SmartL25 4DI C

Interface Type

Bus System AS Interface

Housing Material

Polyamide

IP Rating

IP20

Minimum Operating Temperature

-25°C

Maximum Operating Temperature

70°C

Standards/Approvals

cRUus, EN 50295

Minimum Operating Voltage

26.5V

Output Type

PNP

COO (Country of Origin):
DE

AS-I Slave, Smartline, 4 inputs


DIN rail mounting

Combicon connection

String mounting possible

Addressing socket

Version 2.1 with extended addressing mode

Digital inputs

Input circuit: PNP

Voltage range: 16-30Vdc

Maximum current load for all inputs total: 200mA

Short circuit proof

Actuator Sensor Interface (AS-I)


Actuator Sensor Interface, AS-I


AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.

A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).

By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.

The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.

Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I


Replaces hard wiring

High data speed

Low cost installation

Intelligent diagnostics

Easy to learn and install

Highly flexible

Can connect to other fieldbus systems

User-friendly

Off-site pre-assembly and test

Easy maintenance

Faster on-site commissioning

Host or stand alone use

Able to use standard sensors and actuators (using modules)

相關連結