SICK Female 12 way M23 to Unterminated Flying Lead Sensor Actuator Cable, 3 m

This sensor actuator cable provides a robust connection between M23 female devices and equipment requiring flying leads in industrial control environments. It is designed for signal transmission in automation systems where a sealed, flexible link is needed and supports data interfaces such as SSI and RS-422.

• 12 contacts delivering multi-channel signal distribution for complex systems
• Shielded construction reducing electromagnetic interference for cleaner data
• 3M length offering extended reach without additional joins
• Polyurethane jacket resisting abrasion and chemical exposure for longevity
• Rated to 160V enabling use in typical low-voltage automation circuits
• IP66/IP67 enclosure rating allowing temporary immersion and washdown

• Suitable for connecting encoders using SSI or RS-422 interfaces
• Ideal for machine tool sensor cabling in washdown environments
• used with distributed I/O requiring multiple signal conductors
• Can be used for retrofit projects replacing damaged M23 assemblies
• Suitable for conveyors and material handling control wiring

The cable contains 12 conductors arranged as four groups of two at 0.25mm², two at 0.5mm² and two at 0.14mm² enabling power and varied signal wiring within one sheath.

For continuous flexing applications the minimum bending radius exceeds 15x the cable diameter, limiting stress on conductors in moving equipment.

It functions between −30°C and +90°C when flexed and remains stable up to +130°C when stationary.

The straight female M23 connector uses a TPU housing with a brass, nickel-plated locking nut for mechanical retention and conductivity.

The bus coupler for Profibus-DP (stock no. 492-9208) is required to form a fully functioning encoder