SICK Female 8 way Straight to Unterminated 4 way Unterminated Connector Cable, 20 m

This connector and cable assembly provides a robust sensor-to-field wiring solution for industrial automation, combining an M12 female plug with unterminated flying leads for flexible installation. Designed for use where moving systems and exposure to oils occur, it links sensors and actuators to control systems while withstanding harsh environmental conditions.

• 20m polyurethane jacket offers extended reach and abrasion resistance
• Rated for 30V enabling low-voltage sensor and actuator circuits
• Enclosure protection IP65/IP66K/IP67 allowing wet and washdown environments
• Flexible use temperature range supports -25°C to +80°C operation
• 8-pin M12 female to unterminated 4-core wiring simplifies custom terminations
• Drag-chain suitability delivers longevity with up to 10,000,000 bending cycles

• Suitable for robot cable routing in dynamic automation cells
• Ideal for drag-chain installations with frequent movement
• used with sensors and actuators in oil-contaminated zones
• Can be used for field wiring where open-end terminations required
• Suitable for control cabinets requiring extended-length sensor leads

Conductors are 0.25mm² with a halogen-free PUR jacket and unshielded construction.

It is rated for drag-chain operation with specified bending radii greater than 10xcable diameter and 10,000,000 bending cycles.

The cable tolerates torsion of 180° per 1m and is specified for 2,000,000 torsion cycles.

The M12 female uses a screw locking nut with zinc die-cast nickel plating and FKM sealing material tightened to 0.6Nm.

Stationary use is rated -40°C to +80°C and the connector head is rated -25°C to +85°C.