Lapp OLFLEX CLASSIC 110 CY Control Cable, 3 Cores, 1.5 mm² CSA 16 AWG, Screened, 100 m, Transparent Polyvinyl Chloride
- RS庫存編號:
- 280-5095
- Distrelec 貨號:
- 301-10-608
- 製造零件編號:
- 1135303
- 製造商:
- Lapp
小計（1 卷，共 100 米）*
TWD11,661.00
(不含稅)
TWD12,244.05
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 4 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
卷 | 每卷 | 每米* |
|---|---|---|
| 1 + | TWD11,661.00 | TWD116.61 |
* 參考價格
- RS庫存編號:
- 280-5095
- Distrelec 貨號:
- 301-10-608
- 製造零件編號:
- 1135303
- 製造商:
- Lapp
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Lapp | |
| Product Type | Control Cable | |
| Series | OLFLEX CLASSIC 110 CY | |
| Number of Cores | 3 | |
| Cross Sectional Area | 1.5 mm² | |
| Conductor Material | Copper | |
| Jacket Material | Polyvinyl Chloride | |
| Jacket Colour | Transparent | |
| Screened/Unscreened | Screened | |
| Outside Diameter | 8.9 mm | |
| Cable Length | 100m | |
| Voltage | 4000 V | |
| Conductor Type | Stranded | |
| Minimum Operating Temperature | -40°C | |
| Standards/Approvals | VDE-REG 7030, VDE approved, Design based on EN 50525-2-51 | |
| Maximum Operating Temperature | 80°C | |
| Fire Behaviour | Flame Retardant acc. to IEC 60332-1-2 | |
| American Wire Gauge | 16AWG | |
| Core Strands | 3 | |
| 選取全部 | ||
|---|---|---|
品牌 Lapp | ||
Product Type Control Cable | ||
Series OLFLEX CLASSIC 110 CY | ||
Number of Cores 3 | ||
Cross Sectional Area 1.5 mm² | ||
Conductor Material Copper | ||
Jacket Material Polyvinyl Chloride | ||
Jacket Colour Transparent | ||
Screened/Unscreened Screened | ||
Outside Diameter 8.9 mm | ||
Cable Length 100m | ||
Voltage 4000 V | ||
Conductor Type Stranded | ||
Minimum Operating Temperature -40°C | ||
Standards/Approvals VDE-REG 7030, VDE approved, Design based on EN 50525-2-51 | ||
Maximum Operating Temperature 80°C | ||
Fire Behaviour Flame Retardant acc. to IEC 60332-1-2 | ||
American Wire Gauge 16AWG | ||
Core Strands 3 | ||
豁免
- COO (Country of Origin):
- FR
The Lapp OLFLEX Classic 110 CY cables are VDE approved power and control cables for flexible use. Use and fixed installation for medium mechanical load conditions. They are also suitable for use in dry damp or wet areas. If using outdoors observe the indicated temperature range. These cables are limited suitable for free and continuously recurring movements. The maximum tensile load is 15 N/mm² of conductor cross-section during installation and operation. Compulsory guidance is not permitted.
Flame retardant
Silver Grey colour
Used in dry and damp and wet areas
Resistant to the effects of acids and alkalis and oils at room temperature
UV protection
相關連結
- Lapp OLFLEX CLASSIC 110 CY Control Cable 0.5 mm² CSA 20 AWG 100 m, Transparent Polyvinyl Chloride
- Lapp OLFLEX CLASSIC 110 CY Control Cable 1.5 mm² CSA 16 AWG 100 m, Transparent Polyvinyl Chloride
- Lapp OLFLEX CLASSIC FD 810 CY Control Cable 0.75 mm² CSA 19 Silver Grey Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC FD 810 CY Control Cable 0.75 mm² CSA 19 Silver Grey Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC FD 810 CY Control Cable 1.5 mm² CSA 16 Silver Grey Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC 110 Control Cable 1 mm² CSA 18 Transparent Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC 110 Control Cable 0.75 mm² CSA 18 Transparent Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC 110 Control Cable 0.75 mm² CSA 18 Transparent Polyvinyl Chloride Sheath