Connected to coders, these easily accommodate a movement in materials, speed of movement, etc. Smooth synthetic, striated synthetic or striated metallic coating. Development of 20 cm/turn or 50 cm/turn.
Mounting bracket Z 119.017
For standard flange coders. Supplied with 3 no. M3 x 12 screws and 3 lock washers to fix Ø 58 coders with a centring shoulder of Ø 36 mm.
Mounting base Z 119.015
For synchro flange coders. The coder is fitted onto the base using 3 screws and 3 eccentrics which are ordered separately using reference Z 119.018.
Eccentrics Z 119006
For synchro flange coders. 3 eccentrics are needed to fit the coder.
Kubler
Push pull interface with inverted signals Short circuit protection Age and temperature compensation
